wheels The F2 wheel is 17" x 3.5" but more importantly it has provision for a speedometr drive. F2 rear is 17" x 4.5" and will fit a 160 tire;...
Thurn The only work I had to do was drill the mounting holes for the clips that hold the front uppers and lowers together. Used the Pro-Bolt...
Thurn I have the Thurn RC30 replica bodykit on my '90 and it is some of the highest quality aftermarket bodywork I have ever seen.
Exhaust Go with a 4th gen pipe and get a Staintune for it; gets rid of the lunchbox under the bike and you can fit a centerstand
Hej Torben, valkommen till var varldsdel min kompis.
Link I have one sitting at home and will measure it tonight and post back with the length
Low speed (idle) circuit is still plugged
F2 I have the F2 wheels, forks, and brakes if you want to convert. email for the instructions.
I have the correct grey master cylinder for the front brake if you want it.
Brian, the calipers are the same. ABS uses a tone ring on the rotors to sense impending lockup and modulates the line pressure to limit braking...
I have a set of these F2 wheels and forks to do the conversion. email for pics
Another asshole in an SUV! Hope everything is healing properly. Do you need any front end parts? I have a '90 and a '93 in parts
Just remember that in the ER people who don't wear helmets are called ORGAN DONORS.
Chrome works on show bikes but will flake when changing tires. If you are anywhere near Fayetteville, check out Roger's work at Final Touch...
I put a huge eyebolt in the ceiling of the garage and use a power puller to lift the entire rear by the subframe. Also use the same setup to lift...
I used a set of needle-nosed vice grips to compress the side plates against the x-rings to allow the spring clip sufficient engagement on the...
Thurn motorsports in Germany has a nice LED plate light for $18.00
I have a set of (gold) Pazzo levers for a VFR as well as a set of LSL Spiegler Superbike adapters; these clamp on to the tops of the (41mm) fork...
If you want an under-powered, carbureted, 2-valve pushrod antique buy a John Deere gator. At least then you will be able to haul something and...
Justin, I am having trouble sending you email. Price for the wheels is $200.00Do you also want the forks and brakes?
Separate names with a comma.
