they will fit but are a bit close to the seat making it almost impossible to get the seat on and off. I know because I bought a 4th gen with 3rd...
Are you still looking, got one you can have as I bust these bikes as a business. Send pm. address and you can have it.
yeah its fun! you should get out more, your number of posts says it all. Mind you, when I do go out and drink stout, I meet the same bullshitters...
I am in the UK and never heard of any of this crap, not in any of the mags either, you will get 115 120 bhp by spending a fortune and end up with...
tapping from the valve area does not point to valve clearances being out, they usually close up in service, to the point where the bike starts on...
you found any yet, send me pm
you should read the other thread before complaining:sorrow:
use a car jack and piece of wood to support under the frontpipes. Be very careful as the bike can come forward off the stand, dont ask how I know....
i dont need to defend myself, a good damper is imperceptable at low speeds, try one, not many on here can tell the difference whether taper...
no we are talking about a steering damper that damps sharp inputs, like I said, I am not prepared to argue to the finest end of a fart about this,...
you do not understand what a steering damper does, it reacts to sudden inputs, not slow turns as in normal riding, in fact it would be more useful...
thread revival, gen3 will fit a gen4 at a push but the seat is very hard to get on and off as they end up around 1/2 inch narrower. I know this...
cant be so bad if you did 1,000 miles. my ZZR1100 used to make my fingers tingle after less than 50 miles and then my hand started to go numb,...
well its easy to remove the 3 nuts that hold the assembly to the bracket. there are two multiplugs, one blue and one a sort of green, they have a...
side panels first, then mirrors and screen and then top section in one piece, no need to remove lowers unless you want to. agree about the...
I think its just as easy to remove the fairings. Remove both side fairings, 2 bolts, 3 1/4 turn and 2 more on the inside of the front wheel arch...
Oh, my first post and its to say I ride a 95bhp VFR750 but I used to ride a ZZR1400, does that qualify me to have an opinion:offended: Anyway, Hi...
Separate names with a comma.
