Martman, I took everything apart, master, line, and slave. Cleaned everything and bleed the system ( by hand) using The Squirrel man's advice. I...
I have been having this exact same problem and it is driving me crazy. I rebuilt clutch master and slave, and had a new (Barnet) clutch installed...
Good find. It would be a nice partner for your 750. It looks ok to me, keep us informed.
Cleaned out the master and it was working ok, then about 45 mins into ride it did it again. This time I think I'll take both master and slave and...
Just lubed up my speedo cable (dab of oil) and no more noise. Did you find any old guys yet?
Thanks Squirrelman I'll get to that tomorrow. I released some fluid from the bleeder on the slave and it released the clutch so the master is...
Last month I rebuilt my clutch slave cylinder as after riding for about 45 mins the clutch would start slipping. It seemed to work fine until...
I just rebuilt my master and slave and things worked a lot better, problem is that it showed me how bad my clutch is, so I now have new clutch...
Welcome Martman, I too Have an 84 VF750F ( due foe Paint & new clutch). I've gotten a lot of good info off this site, and had a lot of laughs.
I've got 54,000 K on my 84 750. I'm pretty sure PO's never changed clutch, and it is starting to slip, so I'm going to do the clutch soon (hoping...
you will have to keep an eye on ebay, and check for motorcycle salvage yards online. There are a number of yards in Ontario. Goodluck. By the way...
Not sure if it is genie, but don't loose it. Exhaust for these bikes are hard to find. The damage looks repairable and there are a couple of...
Check FSM, It's fairly easy. Fairing off, and off hand I think 4 screws to take out dash. Screws on back and pull cover off. I used the polish for...
Where in Canada are you. I'm in Toronto and had my front cam done for $55.00. there is a place out west called Shadbolt Cams Home . These guys...
You got the CDI repaired? By who and for how much? Any chance of pictures? Thanks Garry
on my 85 there is a bleeder screw on the thermostat housing. I had a problem after changing fluid because of air in the system. I bled out some...
You should check the pushrod for wear, this could be why the seal is damaged. V4 market place has what looks like a small pce of foil that wraps...
I've read where vasaline or peanut butter work. You coat the boot in it leave overnight and clean the next day. For fun I tried this on an old...
I wouldn't mind a hindle setup for my 84 750, are they the same? Right now I run a Yoshi header and can, great sound, but a little loud. Garry
Welcome and enjoy your new toy.
Separate names with a comma.
