Hi to all , I wonder if I can use some H4 LED ( Picture added) [ATTACH] [ATTACH] on my RC36-2 without any issues . Already have a MOSFET RR from...
Before sending this part to powder coating I have removed the stock RR fixing screw , and opened another so I can install the R1 RR. [ATTACH]
I have a tool to do that. Its on my "To do" list :)
Like mine showing GB , and I'm from Portugal. Maybe because I'm.using VPN.
It's from a yamaha R1 . The previous owner said that it was needed to cut the top a bit so it can fit it.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Today's work. Final stage. After this just install things back. Tomorrow will be a...
I know , but it was left here from a friend , so I decided to test just for curiosity. But yes , maybe the results are wrong , measured with garbage.
I did , but maybe the compression test with a cheap AliExpress tester don't give the real results. I say this because the bike runs great. At...
I have performed a COLD compression test - all 4 cylinders 95 PSi measured with a cheap AliExpress compression tester. Is this good?
Some parts arrived from Powder coating. Now i can continue. [ATTACH] [ATTACH]
Today I have tested all Coils , and seems they all are good ann into the stock values ( Honda manual) . Also tested outside making ground with the...
[ATTACH] Well I decided to go full throttle and do everything at once . Fairings out to paint shop. Hangers and other metal parts going to...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] It seems that way. Today I removed the tank and this was what I discovered: - Spark plugs torqued by hand...
I have fired the engine and all runs fine. But almost certain that if I pull hard again it will happen again.. I really need to dip all...
Thx for the reply . Already replaced the stock Rectifier with a upgraded Yamaha R1 . I really need to check all connectors from the bike ,...
Hi guys , today i went for spin , everthing alright , but after hitting 190/200 km/h the engine stop pulling and sounds like working on 3...
Oh... You're saying that if I mess with that top screw I can change stiffness?
Thx for your words ,you´re very kind , perhaps ppl dont realise , that sometimes the resources are not such available in some countrys like mine ,...
Unfortunelly the previous owner did that , making impossible to me to restore to original state , so i didnt care about it , because already...
Other Mods already installed : Suspension done with a stiffer setup. Braided steel brake hoses. VFR800 stock handles ( 20mm higher than RC36...
Separate names with a comma.
