Your 96 has the narrower rear rim and it is not recommended due to the distorted profile that will reduce the contact patch near full lean. Even...
VDO is a german manufacturer, supplies gauges etc for VW, Porsche, BMW and many others. Your local parts shop should carry them.
Very clean install, Lane. Dual line steel setup on the front brake looks sweet. IMHO, it's begging for some dirt bike bars and smaller round...
Lane and Doug; I have tried the coil input and the coil wire. MIne is currently connected to the coil wire (wrapped around) and still is not...
If you're going to use the existing one as a buck and make a mold for it, I'm sure there would be a few takers who would buy copies here.... me...
As Lane says, there is a backlight that stays on when the bike is running, provided you are properly connected to bike power. It's not great but...
RiderWearhouse (the Aerostich guys) have a simple screw-in carbide stud kit if you get serious. 80-100 in each tire. Rain tires (colder compound...
*SO*, I guess that means that you should never, ever rest it on the car, or park the bike too close to the car either then.... :tongue:
I found an even better looking way of dealing with the oil cooler mounting, just trying to figure out the details of how to pull it off....
3G's (mine is a 93) run the speedo drive off of the countershaft sprocket as opposed to the front wheel on a CBR (up to F2 IIRC) which has a...
I did this on my old FJ1200, but found that it made it harder on the clutch getting the bike out of the hole in first (granted, that bike only had...
Can't say I have noticed any difference that I would attribute to the switch from 530 to 520, as I changed the gearing at the same time. A good...
Sounds like they really deliver, unlike my personal experience with Corbin's products.....they look good, too. When they accordion out, will...
Rather than fabbing up a mid pipe, I'd be interested in whether the stainless head pipes off one of these bikes could be used as well as the tail...
Andrew, those look great. Do they lock on the bike and have the ability to secure gear etc inside like the givi's?
I might be able to help. A friend just swapped F3 bars onto his japanese grey market import Bros 400, and I think still has the spares. The Bros...
Remus is making them again, and Star Cycle has them in low mount, high mount, and a choice of cans. They range from $243 to $405 although the...
If you are looking for lower clipons for the Hawk, I have a friend that successfuly used CBR600F3 clipons, IIRC F2's work fine also. He was able...
Welcome to the gang... Nice to hear of another pearly white 93 in these parts. Not much of the pearly white left on mine, come to think of it...
Lane, I'd be interested to hear if you can ever get the Vapor tach to work on your VFR without it reading totally wacked out and fluctuating...
Separate names with a comma.
