Strange, there is no rebound spring (part 10) on the right rod. The diagram shows one, I dont recall one coming out, I even took apart my old one...
Great, thanks again. Its the hardware that goes on the bottom of the right side dampening rod Im getting hung up on. Part 10. I see the clip and...
Big thanks guys. Any one know the oil level?
Help. Split my forks to rebuild them but left them apart too long. Cant find my shop manual, looking hi and low for the darn thing. I think I had...
Here is the valve. Again, you just drill out holes in the side of the rods to by pass them, and compensate for the extra height of the valve by...
yeah, very detailed instructions. Basicly you open up your forks, drill out the dampening rods with about 6 holes (to bypass them). Then set the...
Looks like they are 29mm. Race tech has them, they are $150 now, they were $100 when I got them a few (over 10!) years back. FEGV S3501...
Sure you can! you they are sold by for diameter not specific application. I dont recall the dia of the VFR forks, 27mm rings a bell.
I agree that the tripple clamps have alot to do with the trail and offset. Race and MX bikes often have "trick" tripples with massaged offsets...
Anyone know if the CBR clamps have the same angles as the stock VFR? I would be warrey of changeing the geometry with out knowing it was a good...
It may not, I see the 83 VF750 had one, it's a round can that lives by the rec reg. I dont recall if my 86 VF500 had a pump or not.
Dont drop the Chain! Tie some mechanics wire and or a string around the timing chain BEFORE you remove the cam and tie them off to the something...
There is a diaphram mechanical fule pump on the bike under the left side cover. When you turn the key the pump primes and you can here it click....
Any idea on the price? The last of my body work is in so I need to move along with this project :wink:
A few wacks with a rubber mallet around the cover, you will here the sound change as the cover breaks loose from the gasket seal.
Over 60 K on my bike, runs great, Stock plastic cracks up after about 40 K or 15 years, LOL. My bike was hit on the left but still runs great, Im...
Decent project bike there, take care of that 4-1 mid pipe! They rot out and as far as I know no one makes a replacement so you have to go back to...
Or maybe drill, tap, then braze :biggrin:
The guys at street fighter have been cool. www.streetfightersinc.com I asked for prices on the lense and bulb parts for a few lights Im...
Separate names with a comma.
