Isn't in the path of the fender if the forks compress at their max? I installed one myself on a 5th gen and rejected this area for this reason.
Thanks for the info. I will try to remove some grease, I know there is a lot. The linked brakes just make this caliper hard to remove from the...
Fifth gen front left brake. I found the inside pad (from memory) was worn through while all the other pads show normal wear for the millage....
Once had a similar problem with my 98. Was just the clocks back plane (flex circuit) shorting on a worn cable holder (ground). Bumps and brake...
It's a full system from what I can see. Actually, I don't see the bulky stock collector.
Imported (back) a set of Corbin beetle bags from Hungary on eBay for 300$. One of them had seen the garage floor (hence the low price) and the...
I wanted it concealed and keep the stock one. The high beam signal triggers a relay that switches between the stock and Stebel, as I did on my 1st...
Compressor and relay mounted in the tail on the right hand side [ATTACH] Horn attached on a coil on the left side [ATTACH]
Do you keep the OEM charging system of the bike?
I was looking at something that does not fling off the chain. Stuff the fling off the chain also get into the nature. I am also concerned by the...
Unfortunately for us Canadian, amazon.ca is not as diversified as amazon.com.
Reactivating this thread for my Canadian mates. Just order Dupont Chain Saver from Canadian Distributor CORE or Competition Off Road Equipement...
Bienvenue. Une belle collection de motos que tu as. J'ai hate de les voir toutes alignées. J'ai seulement deux motos et il y a toujours quelque...
To conclude the thread and answer my own question, after pulling the shaft out, it seems the bearings can be removed without the tools, using the...
Modern switches have tiny wires and you may have to add a relay for the headlight (hi/lo just activate a relay while on your bike the headlight...
Here with our 6-8 months riding season, we don't want it to break in the summer :-) Bearings are all tight and smooth finally. Only need to get...
Winter maintenance. I don't know the history of the bike. Did the front end last winter since the fork seal were leaking. I am changing chain and...
Before I dismantle the rear hub and bearing holder on my 5th gen, I would like to know if I anyone change the 3 bearings without the special...
Double filament bulbs. One is burnt.
It seems I just created another thread 1000R in 1000F :-) Thanks you all my American friend for your reply but my question was more for my...
Separate names with a comma.
