You may have to get the boots hot for that to work... leave them in the sun, ot put them in a pot of boiling water for a few minutes. If they...
I'm changing the oil on my bike soon, and I'm wondering what size the oil drain plug is. I want to get a new bolt, since the one I have is a bit...
Whoa! Is this stuff for the 1st gen VF?
The manual says to loosen all four boots, then partially install the rear carbs, etc... the manual also says the engine must be removed to replace...
There is always a next time...:drum:
This is after installing a Kerker 4-1 exhaust. I gained a whole 1hp by installing the exhaust... but there's still something wrong. Video of...
smooth lines, but it's running very rich, and a drop in power. The AFR is consistant, but uneven. Not too happy about this, but stumped for now.
This one was way off. Turned out I missed a fuel filter that was clipped under the pump... happened to be the original one too.
To get at that last vacuum port, use the small space between the thermostat housing, and the engine mount plate (the black thing with three bolts...
I dunno, but they fit. Didn't do that much for performance, but the bike doesn't sound like a sewing machine anymore.
There is a fuel filter clipped under the pump. That one eluded me for weeks, and was the cause to so many problems.
I've used Kreem, Redkote, and POR-15. Redkote sucks, the Kreem worked fine for me... it's now been two years, but the POR-15 is by far the best. I...
The front two carbs are downdraft. Under rare circumstances, excess fuel can varnish on the slides, causing them to stick. Once the throttle is...
you can get them re-ground too... that way you can choose different specs for them. There's a place in Australia that does this
Look on ebay. I found my set of HRC cams there. I see stock ones there all the time, sometimes there are new ones too.
Dunlop arrowmax (GT501) has both sizes. I payed $120 for the rear, and $95 for the front at Cycle Gear. Mine were lopsided for the first week......
Yeah, 6 is indeed the max for the front, but there is no minimum. I personally ride without any, since 25 year old fork seals provide a plenty...
Hey, seb. I have another set of headers, which I installed on the bike. I was going to send them your way, but decided to test fit them first (and...
Separate names with a comma.
