In that case, I would just be bleeding the fronts if I would be re-building SMC and won't be touching PCV and rear wheel bleeders, right?
Thanks for the clarification and think I might have to rebuild SMC after all. Looking at the parts:...
Thank you, so I just crack open two bolts for front caliper and then remove dust boot for SMC and then try to clean the area, correct? Also, when...
So I noticed some brake fluid seeping in the attached picture area. Is this cylinder rebuild able or needs to be replaced? Also its consuming...
Thanks again OOTV. Bought the well nuts for a really good(cheap) price:...
Thanks OOTV, I was more after the #14( I think?) https://www.partzilla.com/catalog/honda/motorcycle/2000/vfr800fi-a-interceptor/lower-cowl...
Does anyone know if I can buy cheaply fairings grommet(nut side), where bolt goes into it? Like from ebay or china or something? Is there any...
I agree with both of you, will clean everything well with a degreaser today and ride around the neighborhood for 10-15 mins and then re-inspect...
Sorry, yes I took the picture when coolant was dripping but highlighted area had some oil dripping too.
I'll order a Honda one and then see if dripping is going to be fixed.
Thank, curious where is the other one located? Also, how many miles on your bike?
Are there any symptoms of o-ring failure? Because I pulled it out today and to me it looked fine. Neither swelled or cracked or anything.
Thanks everyone, yes I did change the oil and used a new crush washer. It wasn't there by PO. SM, would there be any huge oil leak if I remove...
So I noticed a very small leak coming from the attached picture area, while engine was running. Does anyone know if it's #8 causing this leak?...
Update, hose was cut for some reason and yes it was a fuel overflow hose. Coolant was coming from one of the hose not sealing properly on water...
Thanks, I actually never opened the drain bolt. I just removed the whole hose going to water pump and that's how I drained the coolant. But I am...
Thanks TS. I pulled the fuel overflow hose coming out of the tank and for some reason I didn't see a T(elbow joint) and it was cut to a shorter...
Thanks, I'll take your advice and clean it up well, because I didn't have any coolant leak before I drained the coolant. SO maybe a similar issue,...
So I have drained old coolant, once I poured new coolant back I am seeing a coolant leak from water pump area. It's dripping all the time and bike...
Thank you OOTV. I'll take a look as a winter project for a whole kit replacement.
Separate names with a comma.
