I tried a low pressure facet electric fuel pump on my vfr700. I found even with the electricity cut, the pump remained open. This means gas is...
http://vfrworld.com/forums/1st-2nd-generation-1983-1989/15959-its-alive-my-cbr600rr-tail-project-lives.html Hmm, I think you and the guy in the...
Jamie modded a 929 shock for my 2nd gen last year and I am happy with the work. I think he cut almost 2" off to fit my older style bike.
Looks nice. Any ideas how difficult the tail swap ? I dislike the stock tail.
I passed through Ohio a few weeks ago. I stopped at the AMA Hall of Fame/Museum outside of Columbus. The have an exhibition about the Honda...
I have an old motion-pro carb sync tool, with the mercury capilliaries and 5mm brass adapters. Last week one of the adapters snapped while on the...
I'm looking for a set of 4 carb pilot mixture screws, new or used, for a 2nd gen 87 vfr700. These are 'standard' Keihin FCR mixture screws,...
I put these float gaskets on an 87 vfr700, they worked great.
Anything special about that fuel relay ? I replaced the stock 3-wire relay with a 4-wire automotive relay. I grounded the extra wire to the...
Thought about, even have crash space in trenton, but pit pass tickets are $$$. Going to vintage car rally in CT tomorrow as alternative. OTOH,...
I live in Connecticut, along the metro rail line. I'm new to northeast. Anybody recommend good day rides in northwest CT or south part of Mass ? I...
Balance carbs before adjusting pilot screws ? doesn't that throw off the mixture at idle ? does a carbtune tool help ? worth the money ?
I just bought a replacement pump. Search the forums here for info. Here's what I found 83 honda civic 1.3L fuel pump 83-86 honda magna fuel...
I'm replacing my stock fuel pump with an aftermarket solid state type. They were popular on air cooled volkswagens and older fiat cars. Made by...
The pump relay tends to go bad due to heat. Short the black & black/blue wire at the relay connector. This will apply power to the pump when the...
Short the black & black/blue wire at the relay, this will start the fuel pump when the ignition is on. The red or yellow wire goes to the ignition...
The grey cap that covers the idle mixture screw on my carbs have come loose---the caps spin but the screws do not turn. Should I: - remove...
So the 3.50 is the stock rear rim ? The sizing charts are confusing. Just to make sure I understand, that number is the overall width, but the...
Rear wheel on my 700f2 is stamped 3.50. The stock tire is 130/80V18. Why does the Continental catalog say a 130/80 goes on a 3.00 rim ?...
nice model with centerstand & seat cowl.
Separate names with a comma.
