BTDT, My old suzuki (mikuni), you turn out the sync screw to increase idle. The v4 carbs are the opposite, turn in the screw to increase idle....
+1 for bleeding the banjo bolt. That did the job. A helpful tip from this post...
I had a leaky clutch slave clylinder (service manual calls it release cylinder). I cleaned & replaced the seals in the master & slave cyls. I...
Can you provide some specs on your scooter overflow tank ? So far I haven't seen anything that would replace the vf750 tank ?
Need replacement middle stays for the vfr700 lower fairing. The originals were pretty wimpy so I would like to find something stronger, anybody...
I'm interested in the F2 hand grips. Do you have any photos?
great photos. I have similar problems mounting one of Jamie's shock on my 2nd gen vfr700. I was thinking of using a 90degree elbow on the upper...
Anybody actually bought something from Carnage Moto (based in France) ?
2nd Gen in Hamden. PS Looking for someone todo plastic repair ...
Pulled the keihin CV carbs from my 86 vfr700. I want to remove the jet needle from the diaphram/piston assembly. The needle is held in by a...
Good advice but will cause a cloud of oil smoke when you start your bike next season. Or maybe I add too much oil.
Thanks squirrel. I noticed the float valves have an internal spring, last carb cleaning I had a spring stuck, it took some persuasion to...
Pulled the carbs from my 86vfr700, now sitting on my worktable. Everything looks pretty clean, no leaky o-rings or torn rubber diaphrams. Bike...
I replaced the thermostat and rad cap. I refilled coolant at the radiator. I confirmed the thermostat is opening. Now the overflow reservoir...
My limited understanding of automotive cooling systems says the radiator should be able to pull coolant from the reservoir when the radiator level...
The FSM says to top up cooalnt using the reservoir, not at the rad cap. Despite the book, I've always topped up the reservoir.
I'm looking for a pair of center fairing stays for a 87 vfr700. They hold attach the mid/lower fairng. These were honda part 64515-ML7-700. The...
I have a 87 vfr700. Looking at the service manual I see the 86 vfr had some kind of shim between the rear brake pad and caliper body. The 87...
Bummer about the road contact. Mine looks about the same shape as yours. I added a couple zip ties as a roadside fix a few years ago, haven't...
Your description matches the temps behaviour on my vfr700. At idle it will go almost to top before fans kick in. On cooler days it stays around...
Separate names with a comma.
