Well "until fall" became spring but the heads are back together. I lapped the valves & installed new valve seals and cleaning...lots of cleaning....
I got one of his kits last week. Easy job to do while your checking valve clearance. [IMG]
you can check the disc rivets or what this brit guy calls "bobbins" [MEDIA]
Just to be different, I installed another brand RR. I used a polaris 50A series RR (PN 4016868). A 4" steel plate used as an adapter to mount the...
That was my thought also. There wasn't clearance between the frame & cable bracket for a screwdriver. Next time I will pop the throttle body out...
I am relatively new owner of a 99 5th gen vfr800. I have been riding a 2nd gen vfr700 for past 10 years or so. My 5th gen needs a new thermostat....
If you go with the solid state fuel pump, get one with a "positive shut-off valve".
got the crankcase halves back together. Compromise was necessary to move this project forward (I needed to reclaim my workspace). I swapped engine...
You could 3D print some lower fairing stays, those are impossible to find.
Yeah, I thought about using an 87 head but decided too much work and will go with head from an 86 motor. I was hoping to use the rocker arm...
Been distracted over the summer by pandemic and home reno. Good news is lots of saddle time on my 87 vfr & RE. Motor is still apart. I have...
Ack
Kudos to your effort but... doesn't motion pro sell a tool like this ?
Was planning to ask DMr mod a 2nd gen shock next year :(
Sounds like a loose wire connector or a bare wire is contacting the frame when turning forks. Electrical problems require patience and...
On ebay complete set vf1000r bodywork, patched but unpainted cost is ~1k US with shipping....
Do you know if Parts Unlimited is a rebranded sprocket (ie. sunstar) ?
I am working on a set of cylinder heads from an 86 vfr700. Several years ago I did similar work on a 87 vfr700. I was hoping to use some of my...
Separate names with a comma.
