For the speed sensor part, could be that the speed sensor plastic nut that goes over the sprocket bolt is not in place correctly or is worn out. I...
Thanks and good luck with your project! I've seen so many question and problem threads where the actual answer/solution never gets updated that I...
Got a couple more. This is starting to go out of the scope of this thread but as it's about the end result I'll post them here. This 20 year old...
Yes, someone wrote somewhere :) that the kevlar ones are less grabby. I can't compare since I've only had the kevlars but they are great so far....
Thanks guys! It feels more than great, I ended up going deeper than originally planned but I really feel it was worth it. So, 662km later (~170...
Maybe the 2 bottom ones, connecting the side fairings together at the very bottom of the bike? I just finished putting mine together. There are 8...
The bike is now fully assembled. Here are a couple of quick pics. Got the voltmeter hooked up too and now the voltage is very stable at a little...
I got the new radiator cap and having it installed the system held pressure nicely so ahead I went and installed the throttle body along with the...
Brake lines bled. It was not as bad as I expected having read a few horror stories but it does take a bit of patience to get completely empty...
The new spacer is good, there is now enough clearance between the right rotor and caliper bracket. Pressure tested the cooling system and found...
Note to self: measure every non-OEM part before installation. My new front brake discs are 0,5mm thicker than original and as a result the...
Swing arm stuff assembly today. Nothing much to write about really. Bearings were good so they were only cleaned and repacked with grease. New...
Thanks for the link, that would do the job. I need a more local source though, cheapest shipping option from there is $103.61 :eek:
Good to hear. I went for the AS3 stainless clamps since the originals were partly in so poor condition. They are a bit wider but no problem...
Slow but steady progress. Water pump and new hoses installed. Next up would be a pressure test (I don't want to put it all together just to find...
Finally! The shift star kit arrived and I got it installed. There's a chance I'll have time to start putting other things together too in the near...
The old ones were definitely hardened and not very flexible at all. With a bike 20 years old, even if the fluids have been changed regularly which...
Thanks. No, it's not finished yet. I'm still waiting for some parts since the global situation has slowed things down quite a bit. I will be...
Back home and making some small progress. Got some rubber on the wheels and the front now has bearings, dust seals and new brake discs with Ti...
Cleaning the mating surfaces and threads actually ended up being easier than I feared. A sharp tool and some patience was required but the mating...
Separate names with a comma.
