Where are you in Austin and is your bike actually running ? Actually, just saw your post about the clutch, send me a phone # or email, I may be...
OK, they aren't cheap, but try a set of these. They work GREAT ![IMG]
I had a hard time finding compatibility info for the PCIII so I thought I'd share my findings with the community. Some of my findings may be wrong...
Thanks for the insight, I suspect I'm going to have to do the same thing with a little more considering the can I'm hanging on the back, will keep...
I do have the *RARE* left exit, but I prefer the right exit, the novelty of the fully exposed wheel has worn off for me. I don't have a center...
Good to know, thanks! The whole reason I would like to do it is because I have a left side header, but all things considered I think I'd prefer...
I actually finaly have all the bits for the project, save the small peice to join the header to the muffler from a CBR959, will probably test fit...
In case anybody is intrested, I can confirm that risers built for the 98 VT1000 Hawk fit perfectly on the 98-01 VFR800. Nothing fouls and...
Anybody even have a thought ?
Does anybody know specifically if the exhaust system from a 4th gen (94-97) will fit a 3rd gen (90-93). I'm mostly interested to know if it will...
They are not really removable unless I want to bleed the whole system again, hence my asking.
I am attempting to have a complete set of brake/clutch lines made up to basically replace everything on my 5th gen and keep the LBS intact. My...
+1 on the fork comment. My project VFR750 had exactly the same issue. I got the front wheel off the ground, loosened all 4 bolts that hold the...
Input on 98-01 Models I can't speak for the 6th gen, but on my '99, I purchased great lamps of ebay, just search for "2X T10 194 WHITE LED Car...
Anybody ?:confused: Am I going to have to resort to hitting up my buddies on cbr1100xx.org ?:mad:
So I was looking at just replacing my '99 (5th Gen) clutch slave cylinder, so in doing research it seems that almost all VFRs and VTR1000s share...
Hello all, I'm having a similar problem and I'm comparing notes. Can somebody tell me exactly what an IPG is ?
Eddie Cap: This is not my first project bike, I have had a Ninja 250, a Honda VF500, a Honda Hurricane and a Honda VFR750 before this. I have 3...
OK, so I worked out that the small round plug actually connects into the side of the "Air intake solenoid valve" which is actually screwed onto to...
The #2 is not the one for under the air box, that one is already connected.:tsk: I think I agree on the red line, but it's strange that it...
Separate names with a comma.
