That sounds more like the typical bad engine kill switch issue. The kill switch is relatively easy to take apart. Check for corrosion and melted...
I've never heard of the "typical bank angle sensor, kick stand sensor issues. " from the VFR. in any case, here is a simple wiring schematic. Did...
The coils are wired straight from the computer. The fact that you have one coil firing and not the other three makes me think the computer is...
Man, those rads would get pretty beat up with the roads I ride on. On my bike the lower part where the two side fairings come together got sand...
Hmm I would think putting a GUN MOUNT in the intake would restrict air flow but what do I know.
Clean the throttle bodies including blowing out the starter valves with carb cleaner. I've got the same milage and cleaning TB's smoothed out my...
Just unplugging the PAIR valve actually leaves the PAIR valve open all the time. You want it closed. That's why they sell block off plates or just...
Google canoe on bike and came up with this... [ATTACH]
I bought a Shorai for my Polaris Sportsman 500 (single cylinder) this winter. Even with the garage at 35 degrees it cranks the engine great. The...
Those look like good numbers to me. I think the more stable the voltage is is an indication of how well the R/R is working.
It could be a fouled spark plug or coil. Any FI lights? Do you know if the valve inspection has been done? I'm always a fan of doing a compression...
I'm east of Tulsa. I use to go to Edmond a lot when I had a bunch of friends living there going to UCO. But every one has since moved away.
The stator plug is on the right side of bike just above the clutch cover. It's kinda buried in with a lot of other wires and connectors. Most...
It also depends on the type of roads in your area. Concrete, asphalt, type of aggregate used...
Your readings are consistant with my bike.
It sounds like the wax unit adjustment, you would be surprised how little adjustment makes. While you are there you might spray carb cleaner in...
Define "hard to start." How many seconds of cranking? Why did you adjust wax unit? Were you have problems with the fast idol before? My guess...
Congrats on the bike! I agree with Pliskin above. Also, check the side stand bolts as they may come loose. A little locktite on the bolts is all...
If you are burning out light bulbs then you sounds like you have have an Over voltage issue! You need to not run bike till you check out your...
Not sure how they can even show these new F1 cars on tv with most of them looking like a gentleman's sausage. The Lotus looks like it had some...
Separate names with a comma.