This is how it was done on a 1993 750, using 929 pegs: [IMG]
Colour me jealous! I've been wanting one of those since 1985!
[IMG] [IMG]
Having swingarm bushings/bearings in need of lubing will NOT cause a tight spot in any chain, certainly not a newly installed chain/sprocket set....
EBC HH pads, can't go wrong.
Hey, I normally don't go out for streetfighters, but that looks like someone put a lot of work into it. Check out the buzz-saw brake rotors....
I'm here now, aren't I??? :)
Well, I made my own aluminum undertray and had it coated with high-temp ceramic coating and haven't noticed any exceptional underseat heating....
I built the system myself. Here's a thread on the buildup: http://tinyurl.com/2cwm6c There is a slight amount of contact between the...
Haven't heard of any aftermarket companies building these for years now. You'd basically have to roll your own using a pair of aftermarket...
Markjharris over on the UK VFR board is doing just that, geardrive engine in a VTEC chassis....
Look at your rear shock linkage underneath the bike. See the two triangle shaped pieces (one on each side) with three bolts and an arrow facing...
Crazy Larry converted his 500 Interceptor to belt drive: [IMG] And he's currently converting his RC45 to belt drive as well, here's the...
The 636 USD front end was also photoshopped on. The lower picture is the actual bike, before he crashed it and rebuilt it with a supercharger....
Larry's bike is a Canadian Model, and is definetly serial number 002. Not sure which (total) RC45 VIN number ranges were canadian and which were...
I put in the original version of this photo at 2576x1932: [IMG]
You need to maintain the same master to caliper ratio if you are retaining the stock calipers. On the side/underside of the master cylinders,...
PM FotoMoto. He put a standard handlebar on his VTEC for a more upright riding position....
And a direct link to the Mfgr's page for your bike:...
Laser from the Netherlands still makes a slipon for the '86-'87 VFRs. Pictures here: http://tinyurl.com/2vxn4q
Separate names with a comma.
