Here's an update. I verified that the Honda speed sensor gives out four pulses per rotation. So the little white 4 stamped on the side is correct....
Yes, that is what Koso recommends, but its not that easy on my bike. My front caliper bolts are flush mount Allen head so I can't bolt on their...
Dixon, one more question. Did you connect all 3 koso speed sensor wires to the Honda sender (power, ground, speed output)? Or did you keep the...
Dixon, are you sure your mph sender gives out 3 pulses per rotation? I was thinking only the km/h senders did 3 while the mph ones did 4. There...
The o-rings in the V of the engine on the chrome pipes. There are 4 in the top pipe and one for the curved side pipe. They are just regular...
That's the big problem with this forum. I'm tired of wasting my time. I'm unsubscribing. You guys can carry on about whatever. I don't care any...
Now we are up to about 80 off topic posts. Where is the "thread delete" button when you need one?
Blame the mods, they don't respond when I try to contact them. What should be 10 or so relevant posts gets clogged up with 70 off topic posts. :crazy:
Due to certain people in this thread, I'm not going to post any more updates here. If you want to see the billet extansions, please go to this...
I'm not saying Scott Oilers are bad, just expensive for what you get. I'm guessing you have the gravity feed model with the flow rate knob and...
Thanks, so far, so good. It's hard to believe that some guys spend $200-$300 on a chain oiler system and the flow rate on those still have to be...
Just an update. After filling the reservoir with 90w and using the primer bulb to "prime" the system I let the bike sit for about 5 days. I...
I just looked up a picture of the vfr800 throttle body and man is it different looking. It doesn't seem to be angled at a V shape, plus it looks...
Assuming you got a cam sensor installed, throttle body assembly installed and crank trigger installed, I think your still gonna need to have the...
As for fuel, I doubt you'd be able to fit a pump into the tank. You could build a small auxiliary tank under the seat just big enough to fit a...
The reality is that this conversion may not be cheap. I know those bikes can run really well with the stock carbs, so I don't see much improvement...
I've never seen or heard of it done before. I don't know where you would find a set of throttle bodies that would mount above the intakes at the...
Okay, I did a bit of looking around and it seems the VF500 has the same basic setup as the bigger VF750 which is a 360° crank, 2 dual output...
I've researched all the oilers on the market and didn't like any of them so I decided to take the best parts available and put it together myself...
I know all about the VFR 750 ignition systems, but not the VF500. Do you have any pictures of the sensors and sensor wheel? Does it have 1 or 2...
Separate names with a comma.
