Final pics and measures before I pack it up to Jet-Hot. A nod to jethro's pic earlier, the stock and Delk header pipe flange faces; noticeably...
Disassembly continues: The two rear header joints and all eight header clamp bolts were sufficiently rust and crudded up, so liberal application...
Here ya go! The big fat square block of steel-encased platinum. [ATTACH] So - if you have an '00, you *should* have a catalytic in your system...
Hello all, it's been four years since my VF4iR project, so it's time for one final project: Replacing the steel-and-catalytic-equipped stock...
Looking at the pic now, I don't think it has a SSSW. I see standard chain adjuster on the rear. Looks awesome, but if it's priced too high I'm out.
2 quick questions: 1. Do the rear header pipes come with a gasket to join with the rest of the system ? Or (re)use Honda gaskets ? 2. Can the...
Does anyone know whether the Delkevic or Motad headers will allow you to remount your centerstand on the Gen 5 ?
All; I did this a couple of years ago. It's vitally important!! that you plug the hose connection at the air box where the PAIR valve drew it's...
I put a Speedohealer on a couple of years ago, and agree with DeadS. However - there are two banks for settings, so you can set one for the odo,...
Late to the call but checkin' in: 2001 with a proper front end. :smile: [ATTACH] I love this bike but I've been kidnapped by a Tuono for...
Ooops - forgot to mention - I already replaced the springs with Barnetts a few years ago. Thanks for the reminder!
OK. I've now run thru everything and everyone looking for the answer. 2001, 51K mi. I noticed back in August that I had almost no friction...
Thanks guys. I have been looking at fiche (servicehonda) of course and I note that 1) even tho the judder spring and seat are shown, they are...
Right. I've done many clutches before, including my 2001. *Somewhere* in the far back memory of time I remember reading or seeing that the Gen...
Excellent Again! Glad you're enjoying the improved suspension Mark! Ride safe, but ride alot !! Cheers!
Excellent!! Glad to hear you're enjoying the swap. First, you want to put the close-wound coils (also referred to as the softer rate coils)...
Oh - I see that now, yes you're correct, thanks.
After studying the wiring diagram for an '02 VFR (non-ABS, but I doubt that matters), I would SWAG that the white wire is the signal wire. I say...
Hi Mark, thanks for reading. Yes, I used the Hyperpro vtec springs in my F4i forks because the F4i springs would be too soft IMO. The vtec...
*sigh* I SO want a Falco ... I love that bike. Mistress is a good name for her. :-)
Separate names with a comma.
