Same for me. I love the r/r from Ricks. I'm at about 15k on mine. They are way more expensive than the other after market junk out there but a...
Okey my VFRians. Rebuild resulted very well. A filter sponge slightly disintegrated and made its way into my carb system. Was missing a vacuum...
The 2 smaller ones were in fact the carb drain and air screw. They just seemed a little more bulbous than I'd figure. The larger one was for the...
The air clearence valve is this little cylinder object screwed into each carb with a single hose to it. They create a vacuum when you roll off the...
Choke plungers are removed too. No gasket there
Hmmm I didnt remove the float bowl drain screws all the way. Just drained carb and that's it. The 2 smaller ones look to be the size of the ones...
Sorry I should of added the ones on the mixture screws seem way smaller than what came in my kits.
The kit came with 5 rubber gaskets. The 2 largest of which are obviously the float bowl and air intake gasket but then there's e round ones. One...
I'm actually curious as to what you've done for that extra ~7hp at the wheel
Besides busting into the head or splitting the case I've replaced all oil seals and gaskets and bothsides of the engine. Tighten down exhaust and...
It was all oem and backfiring before the upgrades, but only after my accident. I put a new own filter clean and all to fix it and it never did. I...
Oh I didn't mention it previously because the backfiring was there before the upgrade. I had wondered if my can being slightly dented was causing...
Thanks squirrel master. I think given what @terry smith said and the great condition prior I'm just gonna go ahead and rebuild. I wanted to re-jet...
Oh and carb cleaner.
Alright fellas. Thanks for the info. I got it all ordered 90 degree screwdriver with changeable bits, d shaped, Phillips ect., carb tuner,...
Okey nice. Ill dive into that read later tonight.
When I changed out all the plugs to try to fix this. None of them looked bad at all in particular. It could be worse now though.
Thanks so much for thr ample advice. Okey was hoping not to pull em. So for my parts/tool list I have: -Carb balancer (what is bench balancing)...
I'm about to attempt a carb tuning on my 1996 for the sake of performance and to hopefully solve the backfiring issue I'm having. The...
For my 4th gen, there's an O ring that goes around the male end of the pump, and a gasket, rubber, between the pump and propeller cover. Both were...
Separate names with a comma.
