just wondering if anybody had sern any carbon fibre reinforced aluminum conrods yet?
It should get down to between 79-83 cruising at about 100K on the highway in sub 25C weather. Try hosing the bugs out of your radiators, if that...
:pope2: unfortunately plan B would have been to take the 200Km detour, with 40Km of rising creeks on the way back. So out of the fry pan and...
I don't like doing it either, especially at night, so no photos. Would've spotted the deep patch before it was too deep to turn around if it was...
I managed to find a flooded road the hard way last night, Water as deep as a VFR should ever go. Headlight underwater a couple of times type deep....
short version, no it'll run happily on regular. Provided it's still stock of course.
working backwards, 3.The delkevic headers are the larger diameter sames as 00&01, 98&99 had slightly smaller headers 1 or 2mm. They work fine on...
Turns out the real cause of the problem was previous owner mistaking ego for ability. Reg/rec was moved to the horn location, didn't think...
Another option would be trying a strong suction cup and just work it from the outside to the centre. 'should' get close enough. Most pros have...
ok bike is a 98 vfr800, any ideas on the next step from here? The bike was running ok while riding to work in the cool morning air then would...
Try checking all the plugs on the electrics. Occassionally a loose connection will do something similar. Is it flashing any fault codes at...
Use a non hardening sealant. One that stays rubbery otherwise it will leak. oem gasket is about 2mm thick. For the price it's very easy to make...
Does it make any difference to mileage. Thought the 6 gen injectors were the 12 hole units not 4 hole like the 5th gen? different fuel pressure...
Just wondering if the rear brake rotor off a 6th gen will fit a 5th without offset issues? and if there is any weight to be saved by doing it?...
Turned out to be just wear and tear. Throttle body not shutting as far as it should. Just lubed it and rode it around with a very low idle for a...
Having issues with a high idle after doing valve clearances. idle is about 2750-3000 (max of the cold idle/choke setup?) Clearances were...
Try in the nose fairing behind the indicators. just in front of the radiators.
I just put a set of the delkevic headers on my 98. Pipe inner diameter is about 1.5-2mm larger than stock, gives noticeably(only just) more power...
In response to OP, try holding on with your feet a bit more. Less weight transfer onto the handle bars.
Thanks, I was actually asking about the pedal/lever on the footpegs not the handle bars. Guess I should use the search function :redface:
Separate names with a comma.
