In the UK the VFR was yellow for 1999. The ones imported into Cyprus were UK models, we had red, black and YELLOW
I'm pretty sure that the plug is the service check plug, that you short out to get the reading from the Fi light if you have an ECM fault. It...
Hey, thats my bike!!!!
Whisky my Ridgeback, now sadly playing in the big doggy home in the sky.
Didn't touch the bulbs, just the switch, but doing them all won't hurt. To do the switch, I just stuck the plastic tube on the spray can into...
Hi Ericp welcome. If you haven't already done so, change the oil and filter. The oil has a great effect on the gear change. I started using the...
Give the switch (in the gap between the toggle and body) a good spray with WD40 (or similar). That cured a similar problem with mine. That was...
If you want to use a tank bag as well, the Baglux / Bagster tank cover and bag is a good way to go. For a manual, I use Haynes and am happy...
Cyprus All year round, mind you, the summer can be TOO hot.
We will be over for the Indy MotoGP in September, then have 10 days of touring Virginia and WV, on a BMW1200GS, which we are hiring from Richmond....
I had the same notch feel with my bike, changed the bearings for taper roller type. The difference is amazing, you don't notice how bad the...
I'm coming all the way from Cyprus. Having four days in Indianapolis, then off to Richmond VA where we pick up a bike (BMW1200GS) for 9 days of...
Just what I'v always said !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I've just finished fitting Hel lines to my 1999, good feel and I really notice the extra power when braking hard. Complete set were about 400Euro.
When you talk about timing being changed by the ECU, its the ignition timing (advance and retard) that is altered, not the valve timing. In the...
I'm coming (all the way from Cyprus). Thinking of flying into Washigton DC, train/coach to Indy. I've 4 nights there, then hire a car to drive...
Thats what my 99 does, two bars and then one blinking. I always thought that this was normal. The one bar has never been steady.
Its a Kappa mount. Will take either Kappa boxes or Givi. I've used one for 8yrs and never had any problem with it.
Most of these 'Non-reusable bolts come with a thread locking compound already on the bolt. Personally, with these bolts, I clean them off, inspect...
Separate names with a comma.
