Sorry to hear about your brother's passing. New Honda fork seals along with new springs rated for your weight will help considerably. Like was...
Hopefully this was a 700 you hacked up?
Yep. Not much differences between the two even between the 700 and 750.
You can go up to a Gen 5 RH switch, there is a locking pin you will need to drill a hole in your gen2 bar to make it fit properly.
Yeah, if your bike runs warm like my #2 does you may want to go for a lower temp switch like squirrel says.
Are you talking about the sensor/fan switch on the radiator or the temp sensor at the thermostat?
If it works like the 86 relay chuck it and jump it.
Poop, I may have to scoop some up for my other 86.
Torque hammer should fix it right up...
How about buy one that was designed for the bike in mind? Hagon, YSS, and Works makes new shocks for Gen 1 and 2 the last time I checked.
It should spare the pump because the relay is a trigger for the pump when it gets a signal from the ignition.
Odds are that bike is pretty far away from riding RIGHT NOW. The chocolatey cams could have melted, you don't know the other problems the bike...
If it was a true HRC it would have a titanium exhaust. This must be some kind of cobbled together racer or the exhaust could have been trashed in...
I found some cheapy GP mirrors at Cycle Gear that screwed in the post hole and actually let you see a little behind you.
You may just want to look into new mirrors with the screw mount the Hondas use. Someone had a thread where they used some gixxer mirrors if I...
Another question- do I want a beam torque hammer or one that clicks when I get the right torque value?
OK, so when I buy my torque hammer do I want it in Newton-meters or ft-lbs.?
I think those boxes are designed to be tamper proof squirrel. When you open them carefully (prying) with a screwdriver you wind up breaking tabs...
I assumed all chaps were assless, that's what makes them chaps.
+1 on what Arn said. I would be very careful about welding onto the aluminum on the swingarm in the way you will to extend it- as that can...
Separate names with a comma.
