Thread on head gaskets. source for 84 vf 500 head gaskets - Earlier VFRs - VFR Discussion
The alternator is rated 18.5 amps min. @ 5000 RPM, 15.8 amps @ 2000 RPM.
A big one does it best.
Shouldn't have used such a big hammer.
This bike is 6 miles from my home, I have to go take a look.....can't help it. 1985 Honda 500 Interceptor 4 Cylinder Extra Clean and SHARP
TOE CUTTER is right, find a running used engine and go from there.
I soaked my boots in silicone solution for a few days, softened them up quite a bit. Applied silicone grease to the insides of the boots, set the...
And I thought mine looked good. Congrats on the find.
The method that works for me is to glue the gaskets to the cam cover and put a very THIN film of RTV on the side of the gasket that contacts the head.
You get the award..........
Lots of opinions on this....everyone knows about opinions. The method that works for me is to ignore the timing marks and rotate the engine until...
If you can't find the Loctite at Auto Zone, it is available at Lowes, Home Depot & Walmart.
It has been my experience that JB Weld will eventually give in to oil and/or gasoline and deteriorate. A plastic glue like Loctite Plastic Mender...
In my limited experience, persistant hanging idle problems are lean pilot circuits due to clogged passages and/or clogged pilot jets. Set the fuel...
I believe that this fellow vinscoot2000@yahoo.com is making aluminum replacement tubes.
I like it!!!
Still don't have a handle on the seal situation.
A couple of pics of my grandson's '83 VF750F, got it on the road yesterday. 1. Cleaned carbs, replaced float needles, needle seats and fuel...
Time for a display of ignorance........and/or incomptence. I saw that page on parts supplier's websites, but am unable to determine which (if...
My grandson's '83 VF750F is dripping oil from the countershaft seal. I have tried in vain to find the seal on the Honda fiches. Does anyone have...
Separate names with a comma.
