Here you go, hopefully it's applicable to your bike.
According to the drawing I have for a 93 onwards 3rd gen. The Fuel Level Sender and Brake Globe Grounds are two separate wires, a Green/Black for...
The other option is to measure each globe socket between the White/Black and Green wire to ensure you are seeing 12v. If you Do measure 12v then...
Quite often this is caused by faulty auxiliary contacts of the Starter Switch, However this will disable Both Hi and Lo beams, so not really...
If your Fi light does not flash a code (Sidestand down, kill switch to run) then there are No active faults. Does the Fi light ever illuminate in...
Kinked, bent or blocked fuel line? Blocked fuel filter? Run the Fuel Pump flow and pressure tests in the Service Manual section 5.
Hi Sudolea. I know this is an old topic, but it caught my attention and curiosity! I did a few checks today and confirmed what you are saying,...
Answer to No. 3 Never heard of an 8gen ECM being re-flashed! Answer to No. 5 Strange question! Standard OEM rear sprocket is steel 43 tooth to...
Ha Ha, why thankyou Dr Terry, agree with your diagnosis, kind of..! IF it won't Crank Over..... Seeing you can Start the engine in Neutral, and...
No worries mate!.... So if I guess its a 5th gen. Check the instrument panel PCB and make sure the copper tracks from the speedo that go across...
Jeez mate! You were asked "what model and year you have"? And the best you could come up with is "its a VFR800F".......Great! ok I'll guess, maybe...
Prove its not stolen, then I'll tell ya what the problem is!
Choice is yours, but strongly recommend you fit new OEM CCT's and stay away from the manual type!
Hi Skimad4x4. Just for info. The HISS system or a faulty Transponder Key will not stop you from cranking the engine over (it just won't start),...
Agree with Squirrelman. For the Clock Display to die at Switch On is a fatal power loss! Assume your headlights are also not working at switch On?...
That's good news, glad you have it all sorted, and a case of poor connection at the Glode Socket.
Have a close listen for the noise/clatter up at the R/H side cylinder head covers, front and rear. This is generally where failing CCT (Cam Chain...
Yep this has already been mentioned a few times! Your phase to phase coil resistance will be very low, virtual continuity, BUT you want infinite...
Yep H.I.S.S. introduced on 5gen in the year 2000 to some countries.
Hi John. Assume you are talking about Main Fuse B. As to why anyone would install a 75amp fuse where a 30amp should be is beyond me! It won't...
Separate names with a comma.
