Don't waste any time and energy checking other things! As has already been mentioned, FIRST establish that you have a healthy battery AND your...
Absolutely me too!
The attached photo explains how to keep the vent hose unkinked when lowering the tank, it's vitally important to do this, take up the hose slack...
If you replaced the battery with your Ignition Switch to OFF then you can't damage the ECM because power to it is isolated by the Engine Stop...
What is the state of your Battery? Was it charged while in storage? Low battery voltage and poor battery capacity can cause strange issues! - FPR...
When stationary with the Sidestand down Ignition on does the Fi light flash a code? - A very common issue is Main Fuse B 30amp next to your...
- Is it still flashing the code? And only with the Sidestand down? - Do you experience any adverse effects with the bike when the code is active?...
Hi Daniel. I can't believe this could be a complex issue, surely the answer cannot be too hard to find.....maybe! Had three 6gens and not a single...
Firstly - Are you absolutely sure it was the Engine Fault MIL? Or was it the ABS Fault Check light?? While riding, if there was an engine Fault...
What is the age and state of your chain and sprockets? Chain tension can also have effects on vibration. How often do you lube and check the chain...
You could at least carry out the inspection of Main Fuse B and its wiring as mentioned. It's the cause of many an intermittent issue. You could be...
Sounds like your Engine Stop Relay is not energizing correctly. The Fi light being On after switch on is an indication the ECM is not powered....
Sorry only had fuel injected VFR's, but was just wondering, have you thought of replacing the spark plugs? Symptoms sound like old, dirty, or...
You're missing a headlight relay! WTF. The three relays in front of the Instrument Panel are Hi Beam right, Turn Relay in the middle, then Lo Beam...
When you did this, did you block off the vacuum line? If not then that would explain the hissing sound and possibly the engine dying due to an...
What is the state of the Red connector at the Starter Relay. Is the Red Wire spade connector making good contact and not showing signs of burn or...
2. Most likley idle speed adjust knob. Do you have the Owners Manual or Service Manual? 3. Why is the Center Stand missing? Absolutely magic to...
Everything works! But you can't turn the engine Off! Never heard of this..... The need to have an on/off Switch in series with the Voltage Sense...
And your Ignition Switch wiring is all stock standard?? Does the Kill Switch shut down the engine.??
Does this help? It's not mentioned that this is the Frame Ground but sure looks like it! See the blue circled area.
Separate names with a comma.
