That link I posted can check any state.... Just hit the drop window and pick a state.... North Carolina state motorcycle laws
Just a thought.... I spent 10 months all over the country riding and sleeping out..... when I saw a wooded area with a way to pull in.... If there...
Here's a link from the AMA on state laws, I put the NC page on for you, but you can look at any state(which is good to know if you're going to...
The owner could tell them it was the only way to knock him out so he could save his life and pull the sick out before it moved around in...
One of the cct's is splash oiled and it is said to be a problem if the wrong(read; heaver weight) engine oil is used....... It's what I heard......
Is the air/fuel gauge an on-board mount, or a test while at home tool..... and do you test at idle, or different rpm's?
Just a little FYI.. When I get a new battery, I will put them on my trickel charger before installing..... New and on the shelf(how long?), or a...
The 08' has a different looking r/r, and the fins seem a little longer(I can't tell if the wire gauge has changed) but the location is in more...
When I had my 99'VFR I cut out the vent hole in front of my r/r to open it up for more air flow, Now my 08' has it in the front.... But I'll up...
Seems like all the tech info is getting covered, but I'd just like to throw out a few things I try to Do/Not do, while out for a ride..... Turn my...
Get a new battery, and don't ride your VFR in anymore of those slow moving group rides.... Your bike does not like heat(r/r)........
I agree with VT Viffer........ PR2's would be a good tyre to use they have better wear in the middle......
Amsoil 10W-40 fully sythetic motorcycle oil
Have you done any burnouts, or rear wheel slides?.... it only takes one time.......
The fact that it's not wearing evenly, I would say is that it's not balanced. I took a frt wheel in to have it mounted and balanced, then took it...
Just put it on the center stand and stick a block of wood under the frt wheel till the back wheel touches the ground..... now you have the best of...
The 1st thing is to loosen up the triple-tree and,finder,the axle/nut,and the pinch bolts. Allow it to re-set itself. then re-torque.... That may...
If the ones you have aren't glued on you can either use air to blow them off, or cut them off.... The best thing to put grips on with is rubbing...
Welcome to the forum..... I started riding street bikes in 1965 .... I'm 64....
Woops.... I ment to direct my post to you(slide..Just kind of stuck in my mind)..... The one I put 100k on was a R 750/5 (72').... I also had a...
Separate names with a comma.
