Sorry I get tired of trolls on forums with nothing to contribute other than poisoned words for no apparent reason other than to be A-holes. Flame...
The difference between free thinkers & bullsh!tters, is that some of us actually do this stuff & document it. We that DO have no idea who you are...
Ah the mysterious Norcalboy, who refuses to share any info, but somehow feels qualified to pass comment on other efforts. Well now my knee is...
Do a search against my username for posts I started, loads of good stuff there now. Here's the latest dyno from a couple of months back, up to...
That 1/4 hose is the thermostat (TS) bleed hose, to clear any air in the TS. With the thermostat closed, the water when cold circulates via a 3/4...
Do some research, all the mods you are thinking of have been done to death on this & the other 2 main VFR forums. Forks, bodywork etc. I've done...
You are better off with heated grips so you can use your normal gloves. If you wear heated inner gloves, you won't find a good fit, unless you...
The Racing unit includes fuel and ignition mapping as standard, for up to eight injectors. It also will auto map fueling based on some software...
The Vtec should be good for over 110whp with a little work, my 5th gen is up to 112whp at the mo on a conservative dyno :)
When you feel like it really. Most manufacturers say 5 years but that is just for repeat business & based on old tech glass fibre lids from the...
Depends where you go, north south middle look here http://www.italylogue.com/weather
The group buy was for the Vtec so Dimsport the makers, used an 02-05 model Vtec to design the harness on & then did their dyno work to create the...
Well that is the first time fire up & the engine is not up to full temp, plus only using about 10-20% throttle ! The important thing is the Vtec...
PB Mag n UK, just did a tyre test the Metzeler came out as joint #1 for the road with a Pirelli Rossi 2. I've got PP3 on my 5th gen at the mo,...
Done, now correct, just connected it up to replace my PC3 to check that the harness would fit as it was designed for the Vtec !
Fired it up with the NEW Rapid Bike Racing (from VFRD group buy), for the first time :)...
Chains DON'T have tight spots. They have a section that is still in original specification, the rest is worn out of spec, YMMV as to when any part...
Did you guys order the exact same kit ? I've not had any issues with mine in car, or either bike !
Not sure what the rules are in USA, but in UK, if that happened & the guy didn't offer to help, just put in an insurance claim against him, that...
I just found one too ! TBR high mount in V good condition, winging its way from the USA now. So in the not to distant future I'll have Motad...
Separate names with a comma.
