During the winter I replaced the starter clutch on my 4th gen. I installed a new clutch cover gasket, applied a tiny bit of Honda bond, and got...
I dunnoh where it is exactly on the 3rd gen. On the 4th it's on the side of the bike under the plastics. Small roundish whiteish plastic cylinder...
anyone know some nice roads i could detour to around this route:...
Here is a very very basic look at my route. Shelburne, ON to Shelburne, ON - Google Maps I would be detouring from it every now and again...
Thanks For all the info everyone. I was either planning to go at the end of this month or at the end of June. 1st day I was going to stay in...
^^^^ This is a good idea, and should be the first thing you check. When you turn the screw fuel should drain out of the appropriate "nipple" on...
shortest rebuild thread in history
I've been pondering a trip around the great lakes for awhile now. I have figured out a basic route and I am just fine tuning it. I'm down...
Due to the Notched shaft (that the Starter Clutch assemble slides onto) and the Large gear on the back of the Starter Clutch assembly everything...
Yum! :redface:
I also used the rubber boots in hot hot water trick. worked very well.
Ahhhh!!! It's clear now. So you were pulling away harder then he could keep up and then he saw all the sparks and thought: "Good! LET IT BURN!!!"
Welcome!! ....and holy moly!! btw...you need a new friend. Maybe one that can tell the difference between Electrical sparking and exhaust...
*sigh* Everything's so cheap in American. :frown:
I also have issues with tire shops not being able to put my 4th gen rear wheel on the balancer. Won't fit. The last guy had to use some crazy...
:jaw: soooooo pretty :drool: :leghump:
I thought it might have been modified after seeing this pic the OP posted with what looks like the R/R attached to the frame Unless that isn't...
Welcome!! ...and sweet 2nd Gen. :cool: For my old '86 VFR, I purchased the Clutch Master "Rebuild kit" from my local Honda dealer. I also...
The angle in that link isn't that clear to me.....but yeah, it's probably a bent oil cooler. Either from the crash...or maybe bent out of the way...
Yeah...maybe the Oil cooler was pushed inwards a little. Or...even scarier thought, maybe the forks are bent.
Separate names with a comma.
