are they even still making the 800FI or are they only making that giant 1200cc moped now?
I saw an awesome 09 in Iowa with 5500 miles for $5600 on cycletrader. I know it's not exactly what you want or exactly near you but that is an...
I'm currently running Z6's and have always run metzlers and would like to stick with them. I prefer to shop locally because I like to support the...
Could I put a 120/60/17 on the front and a 190/50/17 on the rear. I having trouble finding Metzler Z8's in the usual OEM sizes. Also does anyone...
I recently got stranded with a non charging battery. The battery was brand new so it simply was not charging. I figured it was the stator or the...
I use a hose clamp. Tighten it around the filter then put the screwdriver against the screw of the hose clamp and lightly tap it with hammer until...
How easy is to replace a stator? I'm by no means an advanced mechanic but I can do some things if they are not too complicated. oil,plugs, oil and...
I found them. they are on either side of the air box. They are difficult to see and I had to use a very tiny screwdriver to dig them out because...
Didn't see them. what is K&N talking about in install instructions?
Cool thanks
How can you lift the tank this high without removing all the attached lines?
Will I need to remove the tank or can I just lift the tank from the seat side and replace the filter?
I'm looking for blue chrome. Sportech makes one for every bike except vfr's it seems. Sportech v-flow series. The one you sent is though. thanks
Does any manufacturer make these anymore? It seems we're out of the loop for this type of flash for our bikes. They make this type of stuff for...
Thanks to everyone for replying.
Well, the bike has 32k on it now so they are worn out. The front end feels dead and I'm out of adjustment. The rear end isn't much better. It...
My front springs and rear shock need to be replaced. What should I replace them with OEM or aftermarket? Which brand? What lasts longer?...
I have a two brothers high mount slip-on and I need a replacement bracket where the pipe meets the CAT. The pipe has been on the bike since 2001...
I fixed it. The fluid level was just slightly too low. I added what seemed like a tiny bit of fluid and it came right back. I've never had this...
The sevice tech said that the clutch plate problem was a possibility but is pretty rare,but at this point I'll try anything I don't have to pay...
Separate names with a comma.
