Don't know if this has been done before. Most people seem to want to lower the bike by flipping the triangles, or raise the ride height by...
No excess pressure in the tank. I dumped a bunch of Seafoam in and it did seem better. Filled it up and it's running fine. Maybe just water at the...
I have ordered a fuel filter, should be here next week. Does the fuel system need to be depressurized to change just the filter?
Tried Seafoam, I'll see if it makes a difference before I fill up. I looked in the tank as much as I could through the filler and don't see any...
It's not a big difference, it's like if you got a tank of bad fuel. Maybe if I have time I'll just run it down as low as possible to empty and...
Bought a 5th gen 6 months ago with 43K miles on it. Runs great. Except it seemed to run a little rougher at low rpm with less gas in the tank. At...
OOTV, Thank you for your efforts. I guess I'll have to find a cheap, low miles, gen5. Jim
Have 47K miles on my 5th gen, and am looking to replace the rear shock (cheaply). I can get a 6th gen shock with 7K miles on it for $40. Street...
Nice technique!
I use Spider grips http://spidergrips.com/spiderg/models/spider-peak-grip/. Same size as stock, but grippier.
Is the rear wheel still available? If so, how much shipped to 48062?
I'm planning on making my own rear suspension triangles to raise/lower the rear ride height. Does anyone have the "exact" center to center hole...
I have replaced most of my dash lights with LED's, but the bulb for the High Beam indicator, FI light etc. are smaller, and the LED's that I used...
Still hoping for 150mph. Just sounds better than 146mph...
Tried an impact, didn't work. Literally I spent over 4 hours on that one bolt. Tried everything I could think of, no luck. Took it to a local...
OK, I'm in trouble. First fork bolt came out and back in OK. Second one was a total bit*h to get out. Now trying to reassemble I can't get enough...
I had cut the race off the steering stem (split it on one side) so I used it between the metal pipe and the bearing to finish pushing the bearing on.
Has anyone experimented with different fork oil weight?
Having done steering bearings before, I am a little familiar with the procedure, so thanks for the additional info. I would like to add my...
I found some used 2002 headers super cheap. I would like to put them on my 2001 after painting if they will fit. Has anyone done this?
Separate names with a comma.
