And to add to what thx1138 said, it will also keep your brake pistons from seizing due to oxidation because of the presence of water in the brake...
Does anyone know if the rubber part that's on the OEM front sprocket can be added to a aftermarket sprocket like a JT Sprockets?
Good catch, I just checked my PDF file of the manual!
Just a note: Do not buy a 12 point 1-13/16" socket because it wont fit that well. The 1-13/16" is .04mm bigger too, just enough for the socket to...
I love this one, look at all the picutures.......it's very special indeed 1996 honda vfr 750 special edition
Does anyone know the correct size socket needed to get that axle nut off?
Are you running stock gearing 17/43 ?
You really hit 140 on that old dog!
You might need a clutch rebuild kit? CLUTCH MASTER CYLINDER REBUILD KIT HONDA CBR 1000 HURRICANE 1100 BLACKBIRD ST on eBay! It might be sucking...
It's located behind the tail light.
Check the oil cooler and the hard lines connected to it that should be located between the forks and under your tail light.
heading to the Catskills tomorrow morning, leaving NJ at about 8am.
I'm down! I might be meeting a buddy in NNJ to do some riding tomorrow since Sunday is Fathers day.
it might help to know where you are located.
I messed up the threads on my preload compression screw when I tried to remove it from the rod and I'm in need of another one. If anyone has one...
I don't even know how that damper screw is attached in there. Is it screwed to the rod? threaded to the fork cap?
That's a good idea, to bad my mechanic thought of it already. If anything I may have hit it really hard and I hope I did not deform the soft as...
No one has any ideas? Does anyone know if it's OK to hi tit with a torch?
I was in the process of doing a F3 fork internal upgrade to my 1998 VFR and noticed that the small damping screw is stuck. I tried every screw...
I should have my bike back together by this Saturday, So I am open for this Sunday.....
Separate names with a comma.
