#49 is the 12V power. #49a goes to the signal switch. P is for dash indicator. [IMG]
I personally wouldn't recommend the 1000lb motorcycle lift that they have listed on their website. I looked at it in store and found it to be...
Also, your lights went out by design. When you press start, it kills all non-essential electronics in order to give all available power to the...
At 18k, your plugs are due for a change. I think the service interval for them is 16k. While they may look fine, I suggest you compare them to a...
Only connection with issues is what is above. New RR, VFRNess, and terminal strip are on the way. Will report back when installed. Thanks for...
That I can agree with. I would much rather use something like this though as I don't like the idea of having to de-solder to take things apart....
Yes, battery tested good. I don't want to wire directly to the battery and also want to get some switch and unswitched circuits for accessories....
I hadn't seen that one. I am wired for a battery tender but I use a Craftsman model, not one directly from Deltran. That will work however so to...
The burnt connectors are still in place. This means a VFRNess is in my future along with a repair kit for the stator side. The question is do I...
Have to start things with all the necessary tools: Laptop, multimeter, beer. [IMG] -Looks like you gotta do…. “The Drill.” -------- Go...
Better be careful what you ask for. You may end up getting a video of me hula hooping to "I'm sexy and I know it" wearing one of those new...
I watched one on the 15th over the weekend too. Scary and nasty stuff. Younger couple on an 09 ninja 650. No gear. The guy at least had on...
Godspeed, check your idle RPM. The manual says 1200-1300RPM but many (including myself) have found that 1350RPM is better and will stop from...
Hopefully you guys can help me out here as my time these days is limited due to work. Not so limited though that I'm willing to take things to a...
Just to throw this out there, a proper rear shock seemed to help my fiance (and myself) a bit as the big bumps aren't nearly as rough and you...
I had the same problem with mine. I used an impact screwdriver and they came right out....
why you heff be in canada? shipping will be steep for those of us in the USA.
It is a sealed unit that requires zero maintenance. It is either good or bad. The hole I believe is there for the casting process. As far as...
I most certainly will. I wouldn't be surprised if in the next two years we find something up that way.
Noes!!! Honestly I don't know when or where I'll be after this. I work for a trucking company and we're buying companies like candy. Once we...
Separate names with a comma.
