I was hoping to have them set the first time... Being roller bearings. But I have no prior experience. It's not really a big deal anyway. I...
Ok job done. I seated the underside race with a large socket that had a shoulder on it. Don't know the size but it was 3/4" drive. I put the...
To access steering nut to adjust tension: Big photo is first step. Remove the big center bolt. Then loosen the pinch bolts on the fork legs. The...
[IMG][IMG][IMG]Sent from my iPhone using Tapatalk[IMG]
Also mind the specs by the spring manufacturer for the spacer length if your bike uses them. Sometimes the spring manufacturer recommends a spacer...
Look for a straight rate spring to match your weight in your riding gear. A quick google will show a handful of great companies. I have race...
A few questions: 1) getting the bearing pressed down onto the steerer tube: How do I do this without pressing on the bearing itself? Shouldn't I...
So I've begun the head bearing replacement. So far it's been pretty easy. I did manage to put a nick in the steerer but that was resolved with a...
Hmm honda spec sheet shows 28.9 as factory width without bags. So only 8" of difference but of course there are times my bars only look just...
If someone can measure overall width of their cases that would be great! Currently I'm looking at OEM, Shad and a couple of designs by Givi in...
Also available- Shad cases for 399 with the rack. http://www.shadonline.com/ProductDetails.asp?ProductCode=SET-H0VF82SF They are 42 liters each...
Check out Davidsilverspares for factory hard bags. Still has black and silver left for $500 including all hardware. Sent from my iPhone using...
That's an insanely beautiful set of pipes and rearsets brother!! My bike sadly cannot be kept in a garage. Any idea on the longevity Id get from...
Ok metal polish and steel wool or wet sanding it is! Just curious- is this a factory pipe? I noticed it's missing the heat shield. And the...
My 2 days off just went down to 1.5 and I have to do the head stock bearings. Well- if nothing else I can hit em with plasti-dip Sent from my...
The dupli-color engine primer, paint and clear I bought all have the same label which basically says: Apply primer first. Apply in 2 light...
What grade is Brillo and can I use that? I was going to use sand paper and do some wet sanding and scotchbrite for the harder to reach areas. I...
As you can see the exhaust riser has seen better days. I picked up naval jelly to try to brighten it. Any advice? I wasn't planning on removing...
I picked up some dupli-color high temp primer, high temp semi-gloss black and high temp clear. Why high temp? It was on sale and between the...
Is that shorter than stock? Sent from my iPhone using Tapatalk
Separate names with a comma.
