Interesting read about the courier and his mileage. I don't know where he or anyone could run a hundred for more than a bit. It becomes reckless...
Have you tried adjusting the anti dive? It has 4 positions. Be careful with putting on brakes in corners. For road riding do any braking before...
Go for it! You may want to put in new steering stops. It would be pretty easy to weld up a set from thin wall 4130.
My rear caliper was stuck when I got it, I pushed the piston back in, open bleeder first. Flushed the system by emptying the mc and then cleaning...
I should add that I don't have a voltmeter on my bike. I put on a nice Shindigen FET controlled 50 amp regulator this spring and it works fine, my...
Wow I am missing the fun The standard voltage of a wet cell lead acid 12 v battery is supposed to be 13.2 volts. As they get older the voltage...
Sounds like you have it handled. My wife bought a pretty nice looking red VTR250. Nice glossy hard paint. Only problem was that cracks were...
I've bought tubes from franks. They were for my RZ, this was many moons ago. They were dimensionally identical. They had a lot smoother finish...
Nice bike. Don't worry about the chain lube that you removed. The new lube will look dark and nasty before long. It seems like I read about...
Best advice that I can give is to ride at a pace that you don't have to use your brakes. Roads can vary from one day to the next. Traffic,...
HONDA VFR750 1990-93, VFR 750 fairings, bodywork, fairing, upper, lower, mid, seat side, race, street, fender, tail, undertail, tank
I endurance raced a new one of those. I have a picture of me standing on on top of it after I wrecked it. I ended up trading it to my newspaper...
Wheels balanced? Tire pressure? Consider that you could have something loose or out of round in the back. Swing arm pivot rear, wheel bearings....
Most of the bikes I purchase are lucky to be complete enough to run. It has to be cheap to get me to purchase. I take all the parts but am not...
You should go to a club race. You can tell the new riders by their pristine leathers. The experienced riders have various defects in their...
A couple of things to think about. Something to consider is the quality of oil in your bike. Some automotive oils have "friction reducers"....
Do you have a welder? I have melted a nut onto the the end of the broken stud or bolt. The heat seems to loosen it. I m sure others...
Are you going to be building a new frame for it? Going to get one of those RC 836 kits?
The stock headers on my 86 are a type of stainless steel. After 25 years they are discolored but are not rusty. Perhaps yours are as well. I had...
Give the bureaucrats enough time. they will "fix" society. I still don't understand the difference in compassion between the loss of this man...
Separate names with a comma.
