Not tough. Just a life experience that no one should have to go through. Back on topic please. Sent from my LGMP260 using Tapatalk
One would hope that it would not have to happen. But protecting your life comes down to milliseconds, and I've actually practiced removing my...
I carry a small firearm concealed on me everywhere I go (legally of course). I've had a few over the years, and my latest are a Ruger LC9s, and...
.... and the lowering link. The beauty of this is the adjustability, and without removing it. Also, you're not stuck with just one ride-height. I...
Tidied up under the tank a bit. Originally I had just taped off the end of the tube coming from the bypass control solenoid after disconnecting it...
Yes I know. But it's labeled as a fuel filter return. Just calling it by it's given name. LOL
PS - Further continuing with preventative maintenance, I ordered a new fuel filter, return filter and FPR. :)
Yep. I may have to do that. I did it slightly with the old one a few months ago. Starting her this morning the idle was low, about 1000. But I...
Warm idle is fine and at about 1200. I'm just noticing after installing the brand new FIWU that the cold idle is just about where warm idle is....
That was me removing the plastic cylinder from the cradle with a flat head screwdriver. The nut is preset at the factory and recommended to not be...
Here's where I installed the toggle switch, on the inside panel behind the fuse box. Works like a charm. In retrospect, I should have got a...
...[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I installed the FIWU and thermostat this weekend. Straight forward pretty much. Took my time so I couldn't give you a time frame. I wish I had the...
Yes, rubber well-nuts (threaded rubber bungs, thingamajigs, whatchamacallits .....) LOL Thought about hunting down bits and pieces at my local...
Anyone have luck replacing all of their body/fairing bolts with a kit like those on Ebay? I need a couple of those rubber spring locks, all nylon...
How did it even get that far without issues or fire? Worst I've seen. Ditch the plug and install heavy duty separate connectors on each wire. That...
That would be the preferred method. That's what I did.
Continuing on my preventative maintenance quest ....[IMG] Sent from my LGMP260 using Tapatalk
I tapped into the headlight, and then the line on my camera system and wasn't getting true readings; about 11V. Thus, going directly to the battery.
I installed the meter just below the fuel gauge with 3M double sided tape. Ran the wires directly to the battery with a small toggle switch...
Separate names with a comma.
