Ideal rider weights for OEM springs: VFR800 - 55lb front, 12lb rear VFR750 - 20lb front, 90lb rear Setting sag is a good thing to do,...
Looks like stock VF1000R pipes with the end cap removed to me.
Ok, let me clarify a few points: Sag - You can get the correct sag with any spring rate (theoretically). However, the level of performance...
I probably have some. Shoot me an email and I can check if you would like.
They are!
That hole is supposed to be there - it just drains the area in the middle of the V. I would guess your leak is coming from the seals on the...
Shift forks are typically bent first then get worn down. Bending them back and building up with weld could fix them but I would think it would...
Those can be replaced, no problem. Probably the biggest issue would be finding replacement parts actually. I might have some of these laying...
I use volume - 425ml This is not the same as stock by the way.
I double checked and yes, it is just sitting on there. It was off to check the condition of underneath and I just set it back on. You'll...
Mentioned in the original post, 10k miles. Had 5k put on in 85 and another 5k in 86. I purchased from the original owner. The tank is not off,...
That one is for sale too! It's also in really nice shape. It was in a barn for a long time so it is covered in an inch of dust. I thought it...
Both of my boys were out there. I don't think they get nearly as attached to material items like I do.....
Well guys, I've had this bike for several years but I'm thinking maybe time for a new home. It's got 10k miles on it but hasn't been ridden since...
Exactly correct, you need a 10mm longer shock and the 87 model would be the correct length. Everything you need to know is right here:...
Never use valves that look anything but new. The concern is once pitting starts the damage is done and it is only a matter of time, regardless of...
That's exactly right. I often have to remind people that a 17in wheel is not (necessarily) magic - it's the fact that you can get modern radial...
I know I had the head gasket patterns in dxf format at one time, but it would appear those were lost on an old computer somewhere. If get...
I have a cousin in Omaha, maybe time for a road trip....
Hey fellas, just wanted to pop in here to say thanks for your patience. Things can get hectic and keeping up with phone calls and emails is a...
Separate names with a comma.
