What kind of vacuum gauges do you need for the syncing the starter valves? my buddy has some old style vacuum gauges, not sure which kind or make...
Thanks, I will check out the plug caps and coils, first going to try and get the starter valves synced. I'd love to get this bike running as it...
Compared with a mates 98 vfr today, checked both batteries with the voltmeter at the various settings, both seemed roughly the same so as was said...
If it's not charging at 5000 rpms would this cause the rough running? the bike is still starting etc ok.
Problem is still there, I checked the battery with a voltmeter, she is showing; 13.8 volts idling no lights on 13.95 lights on full heads idling...
Sorry to hear that, can happen very easy, I rode off this Summer and forgot to zip the tank bag shut, a certain blast of wind and all the contents...
Is it a very difficult job to change the FPR? my 5th gen has a misfire. just not running as it should, I have fitted new plugs just wondering if...
Refit the tyre the correct way, easy mistake to make especially with some front tyres because the tread pattern can look wrong on them until you...
I wish they would put the 5th gens engine in a vfr800x, suit me at my age!!
Thanks, that's double dutch to me really, I'll ask a man who knows:) well hopefully he knows more than me about it which is nothing, do you need...
Thanks, no he disconnected nothing, just layed the screwdriver across the top of the coil almost touching the frame, he would shield his eyes and...
How would you check if a coil was bad? do they lose insulation as they age, eg shorting out to the frame? my no 3 coil I think it is ( be at your...
I used some gasket silicone when refitting the slave, the little gasket is only there to keep dirt out going by what I've read, amazingly I think...
I sit on the bike suspension compressed and still like to feel some loose movement in the chain at that, too tight will ruin the output shaft...
GT85 is readily available here and cheaper than WD40, I always thought it was inferior for that reason, I will try it out, I usually clean with...
Does it make much difference if the rear wheel isn't balanced? I have never noticed any difference, I always get the front wheel balanced when...
I'm just changing the chain and sprockets and noticed the clutch slave cylinder gasket tore a bit when I was removing it, how critical is it?...
I was just about to ask what is the best/best value chain riveter tool to buy to fit a DID 530 chain but after reading some of the horror stories...
I suppose it all depends on how the chain has been maintained, cleaned,lubed, correct tension, and the conditions the bike has been used in.
I've never noticed the chains on moto gp bikes.
Separate names with a comma.
