I checked the service manual but could not find a diagram indicating the location of the manifold boots. I think that these are the rubber boots...
I have the 02-09 Service Manual but the closest it gets to addressing the question is on page 3-17 where it shows the adjuster nut but does not...
On a 6th Gen, concerning the idle adjustment cable that is on the lower right side, in what direction to you turn the screw or knob to DECREASE...
Never tried it myself. But out of curiosity, what happened? Never seen a glass that fogged up before.
[ATTACH]Yes, the 6th gen has the 23 ft/lbs values. Does the 8th gen also recommend replaceing the bolts?
That sounds like a good solution. Is it possible that you could post a picture of where you anchor them to? I am considering finding a rubber...
Hi Folks. I just finished installing the Hella horn on my 06 VFR but find that the horn sits lower and is in front of the coils. I used the...
The OEM front sproket has some rubber dampners that aftermarket ones do not. They help minimize vibration.
My 06 Vtec has been idiling at 1200+ when I start it but goes to and stays at around 1500 once it warms up. I have tried to adjust via the...
I have a PCV and although it really did a great job with eliminating the low end stumble and overall powerband I do not see anything like what...
Just finished installing new friction, plates and springs. Was a breeze with a nice CDI dial torque wrench I picked up. Thanks to all who helped...
From what I've gathered poking around the net the cover bolts are 9 lbs. My bigger concern was the metal clutch plates. So to be clear, the sharp...
Thanks for the reply. I'm going all out with new friction, plates and springs. Strange how the shop manual does not mention the bolt's torque...
Going to install new Honda OEM clutch friction and plates on my 2006 and have 2 questions. 1. The clutch plates (metal, 7 of them) have a...
Just want to share something I found. I recently changed my chain and rather than buy a quality chain tool set that maybe would be used once or...
I use meguiers or other high quality soap with a microfiber mitt. To wax, this is the best I have found for both car and bike. Durable, nice gloss...
I recently replaced the clutch cover on my 06 VFR and got great prices for it and other parts from Kieth at Mason City Honda...
Since I have the bike indoors right now I'm taking advantage of being able to check it out without rushing. So far the pressure plate bearing...
I had an issue last summer where I was hearing a buzzing sound when coasting from the lower engine area. I found so far that the clutch lifter rod...
That sounds like a good idea. Any other suggestions out there? I have the bike in a storage facility and am trying to put together as many...
Separate names with a comma.
