I had a similar problem with my 2006. The idle was not rising much when cold started and would settle into about 1500 rpm and could not be...
If you just purchased the bike and prior owner let the fluid get that low and old that it became sludge I recommend that you rebuild it and the...
I have an 06, cannot comment on the earlier Vtec's but I have no issues or complaints and do not see it as a danger or problem when riding. If...
Sorry for the delay, just came back from vacation. Snaking around the throttle bodies (no need to remove them) are a series of vacuum hoses, most...
I had a similar issue on my 06 and while adjusting the throttle bodies found a vacuum hose with a small leak. Once I replaced it the idling...
Great video, you are a natural showman. Now the real fun begins, Uncharted Territories await! Safe riding and will be waiting for the next...
I would flush with the original bleeders on. No point in subjecting the Speed Bleeders to possible gunk build up. From what I recall the Speed...
Yeah, thats the kind of part that once I get it out I take a hammer and crush it as an example to any other screw, nut or bolt thinking about...
Dremelling a flathead slot is a good idea. Once done try using a long flathead screwdriver and a hammer and tap away chisel like counter clockwise...
Them, Us, Us, Them. Both sites are valuable and informative. Here it seems more humorous and newbie oriented, VFRD more senior and technical. I...
Camera? That is the ultimate witness! I purchased one of these by GoPro. Small, waterproof, great image and simple one button operation. I put it...
I put these on my mirrors. They are good because they swivel and you can adjust the view angle. Point them at the blind spots and at a glance you...
My first look would be at the tires, specifically their age. The tires have a code on the sidewall that gives the month and year of manufacture...
Somewhere between 10 and 15 seconds into the video I see in the left corner of the video screen what seems to be your chain slapping up and down a...
My first bike was an 84 CB650SC Nighthawk. Great bike and built super solid. Had it for 63,000 miles and other than a stator replacement only...
[ATTACH]I used this for my coolant fills for the VFR and cars. Costs about $25.00 but no headaches or doubts that all air is out.
[ATTACH]This is from the 02-09 Honda service manual. It only shows 10W40, is the 10W30 recommendation in another area of the manual?
I use Mobil 1, but have used Amsoil in the past. As long as it is a true synthetic you can't go wrong.
Would using something like this (picture attached) to jump start the bike be dangerous on a 6th gen? It is a 500 amp with 1000 amp peak jump...
As an update, I discovered and ordered this new Gopro called the Session. It is much smaller, needs no waterproof case, shoots up to 1440HD and is...
Separate names with a comma.
