I have a couple seats for my 2000 VFR, the stock seat and a Sargent seat, and I too have noticed the width of the Sargent seat being a bit of an...
Finally got around to putting the wheels back on my poor bike. She has been sitting in the garage on blocks since I removed the wheels to install...
IIRC, on some of the the European model VFR's (and some other countries) there is a position light that fits up through the bottom of the...
First off, Welcome to the site and good luck with the project. Not sure how much physical damage has been done to the factory fairing you...
Not sure if you're asking myself Lint, or the OP, but mine is fairly simple. As far as cages go, I'm on my 5th Mazda. LOL
Very NICE!! And in the best color too, "Red", not that I'm partial to red Viffers. LOL At least all you have is rain. It could certainly be...
My quick apologies or the thread jack Joey. How bad is your tail light Lint?? I've got a tail light for a 5th gen. It's off a 2000 VFR but it...
Was just looking at the parts fiche for the 2006 VFR800 on my local dealers parts page and they list the same part numbers on the front fork tubes...
But, but......... Where's your snow??? Grrrrr, aaaaaarrrrrggghhh. :)
Upper stay is the black tubular shaped frame to which the upper cowl, mirrors, and instrument cluster are attached.
You are correct, one washer on either side of the banjo fitting on the hose. If you look closely at the front brake and clutch master cylinders...
There are 5 wedge bulbs on the back of the instrument cluster that light up the gauges and LCD screen. 3 for the sleek and tach and 2 for the LCD...
Don't forget to change the dash lights out at the same time. You just know that if you don't, one of the dash lights will burn out right after...
If you decide to go with LED's for the lights you may want to take the upper cowl off. Most of the LED bulbs have either large fans or heat sinks...
Hey Greg What did you use to clean the valley? It looks VERY clean in there for just a quick clean with a soapy type product.
Don't have any info on the black widow exhaust you're showing but I ran across a post on the "Honda VFR800 Owners" Facebook page by Nismo Capri...
I polished the pipes after I got the bike as well, but they weren't terribly corroded. I used roughly the same process as the gas cap and I think...
As most have suggested, getting the parts powder coated or painted is likely the easiest way to go. The only thing you might have difficulty...
My wife keeps looking for a used sidecar that we could get to attach to her CB400. That way she can take the kids to school in the morning, on...
Be happy to meet up with you if we can arrange a good day. I can even offer a spare bed and a sheltered parking spot for the Viffer.
Separate names with a comma.
