You know you are getting old when Randy is the only one left posting in this thread
sometimes i step on the peg 1st before bringing the leg over if i feel lazy (GO ESKS)
Do you have voltage on the horn wires when you push the button? if you do it's like other bikes i have had the horn gets rusty from no use and...
you're welcome. i have been keeping an eye on riser threads for a cheap solution too
gen 5's have 41mm forks, gen 6 has 43mm. those spacers won't fit a gen 6
aren't 2003 forks 43mm?
if you are not going whole hog, the aluminum parts cylinders can be cleaned with brake cleaner or carb cleaner in a spray can but the painted...
i have had SLA batteries from them before and they were good, longer lasting than some others i had bought.
anyone found the frame ground on a 6th gen?
i agree with these guys you should clean your carbs but if you want to try it, use a bunch of seafoam. i had a v45 sabre and it would only run on...
i found the grounds it was a lot smaller than it looks in the picture and buried. picked up 0.3v by taking it off and on again. very clean. now if...
nothing like that there at all. i see that unit there with the plugs on it but no other cables there at all. also do you know where the frame...
I don't know where it is , i took off the front fairing and no green connector or ground block. not sure where to look now
i have been in there with a flashlight with the side fairings off and i can't see where it would be
I searched but i must not be entering the right words, is there a common ground block on 6th gens? just trying to check out stuff for the new...
maybe a stuck pad on the caliber pins, or something i do every year. i loosen the rotor bobbins by putting a bolt in each one and tightening until...
don't know if i would rule out tires/rims. maybe a rim has a spot that can't be balanced easily, they don't really spin mc wheels as far a i have...
Thanks..... I have my chips and blank keys from AliExpress also for the CBF.... the guy that cut my keys didn't quite get it right, have to get...
i use these on both my bikes and my truck. on the bikes i bought a 2 pin trailer connector and wired them to the bike batteries so i just plug it in.
For our German riders ACHTUNG! Alles touristen und non-technischen peepers! Das machine control is nicht fur gerfinger-poken und...
Separate names with a comma.
