[ATTACH]
I keep saying you'd save yourself all that if you'd just get that Ridgeline :Bounce:
IMHO the stator wires will always be warm and the regulator is there to shunt the excess to ground.... so always under load so to speak....... The...
Same guy as the 500 but cleaning out his garage?
Jim, I'm guessing the Texas heat is killing them..... I know folks who don't get 3 years out of them. Not sure if a lithium will be better, but...
HA, been there done that..... guess I should one day post up my Gen5 refurb....
I like the m/c idea rather than air... more control..... just leave the old pads in as a spacer to keep a piston from popping out before the...
I don't see any videos.... deleted? Anyway, sounds like you have to add up the cost (and labour hours) of potentially chain and sprockets,...
What he said above...... Check the resting voltage after your two weeks. 12.5V is 50% discharged according to Yuasa, and sulphation will begin....
A little story... I volunteered to help a local with his Gen6 rectifier, he fried two batteries, charging voltages way high 15.5V. I had to put...
How do you maintain your battery when not riding the bike? Plugged in to a Battery Tender? How long does it sit between rides? Have you checked...
[MEDIA]
I vote any of the above.
Fill the bars with lead shot??
Sounds like the typical drive line lash situation to me.... just downshift and keep the revs up. You could have worn cush drive rubbers, but how...
Your springs are fine, a little heavy is not a bad thing. Set your chinesium fork caps to minimum preload and cut your spacers to have your 20mm...
RE: special grease....... it's sold anywhere, just lithium based moly grease that is NLG1 or 2 and it contains ~3% moly. Not to be confused with...
I certainly know of engines that say to lubricate the threads (and the flanges of the bolts) with engine oil, 2 stroke oil, and moly grease......
The money spend at Roadster Cycle is not wasted, you needed to do that anyway.......
My trick is to remove caliper from rotor, leave pads in, then pump them out with no rotor.... pistons will be extended and won't fall out.... then...
Separate names with a comma.
