Ditto. I'm guessing there are the original connectors wrapped under that tape by the looks of it.
In addition to the O-rings, best put a new thermostat in while you're in that deep.
The plastic cord is a coil to hold it in a larger diameter...... no adhesive, it's sticky enough to stick. You pull the cord out and it "shrinks"...
Right beside that pic was the link to the install, next link describes it and takes you to the video....... if you're recovering m/c grips, get...
If you want a little stickier grip, try Re-Grip or if you want a diamond texture try their other product called Stickgrip. If you get a kit for a...
Sigh......... Stray musta got mad at me for suggesting a Ridgeline....... I've had many Rams, like the Sport the best since there's no chrome......
Before you paint, clean up scrapes with a file, as smooth as you can, then Scotchbrite rub all over... if uneven finish, hit it with a heat gun,...
Yes, simple as that. If this is a Gen5, vac line gets stored on underside of airbox lid, two plastic "plug" projections on each side (4 vac...
What squirrelman says....... Potentially charging system issue is my first thought..... check your R/R connections are not fried....... you fire...
Tail or licence plate wire will be live with ignition......... you'll need a ground wire...... I've only heard "neutral" as part of house...
The question is, is it a vacuum line...... unhook and see if there is vacuum at engine idle, if so, you'll have to plug the line or go upstream...
I've re-used many... use new ones that come with new lines..... mostly generic as they are used on virtually every bike you know.... measure up...
[ATTACH]
I use a mix of about 50-50 Simple Green and water, then add some Dawn dish soap. Never had a real problem with aluminum in there at all, but best...
This scam is happening on several forums... disengage, NOW!
Thread locker on those bolts is old school, modern bikes don't use it for that very reason. The copper washer is more than enough to keep them in...
Honda ST1300 has a couple of styles.... 5 and 6 mm thread, two shoulder lengths and a couple of thread lengths. Hex drive 5mm.
Check the ground spider taped into the harness by the regulator, and also the chassis ground on the right side of frame.
I suffer from tinnitus, so I called the Tinnitus Hot Line........ there was no answer, it just kept ringing.
Ping mello dude by message on this forum.... he may have some he made.........
Separate names with a comma.
