Go ride a bit and see if you want to upgrade fork springs, etc... then change oil or rebuild or spring decisions can be made.
First you have to know if the battery is good, so best have it load tested. Second, I'd highly recommend a regulator upgrade and direct harness...
[ATTACH]
No idle adjuster is a problem. Starter valve sync in order, check spark plugs and spark plug boots for proper resistance. Might want to have a...
Plenty of good riding in SE Ohio...... I make the trip a couple of times a year.
Canajan Hondas had HISS too, but not my '99. Not sure about '00 and '01....
If you want a series r/r, try one from a Versys 1000 (2015-up) it's a SH866 in a smaller format (same size as a FH020).
It's in the other sandbox..... try this... https://www.vfrdiscussion.com/index.php?/files/file/166-vfr-800-1998-owners-manual/
Welcome from just up the street.
I suppose if one was creative one could cut the tube and insert a fuel resistant rubber hose.....
What reg did you use? OEM? New or used? If OEM, you better check all connections, including back to the starter relay and ensure clean and tight.
Looks like regulator.... visit Roadster Cycle and upgrade to a modern mofset and bypass all those stock wiring paths.......
Old grips get worn smooth and go hard.... plenty of choices out there, look for a larger diameter. Your wee Ninja may have a slipper clutch, which...
Might be that your overflow is dry and it can't suck coolant in (to replace air) when it cools down.... check rad on the side stand and top it...
I doubt the choice of hoses will run cooler....... agree with Grum, thermostat isn't working properly.
I'll add check the connections to the starter relay are not melted/corroded. Stator wires stay to the left side...... not in the V at all.
Meanwhile, if bringing a helmet back to North America, I wouldn't worry much about having a DOT sticker. I very much doubt anyone will be...
Don't our bikes take plugs with crush washers? Ditch those Autolites!!
Well, maybe time to dive right in and ensure all is in good shape..... aside from the hydraulics, ensure the clutch rod is clean, lubed and moving...
Separate names with a comma.
