That is beautiful! Your mod is exactly what I am hoping to achieve. I did this to my KLR, but wasn't afraid to sawzall some plastic in this...
Race Tech Spings are in the shop, I am going to start the spring install preload setup, and seal install this week. The weather has been good so...
Good to know. Thanks.
Wonder No More. Per Mike at RaceTech : "There is a 12" piece of spacer material included. If you need more, we use 3/4'' PVC.
I was wondering about whether the springs will be shipped with any material? From what I am hearing around is that the existing preload spacers...
I am waiting for my RT fork springs to arrive and am reading through the install detail at RaceTech website. If I am just replacing stock springs...
Dude, I hope I can be of some help to you some day! If you have need for a process vacuum engineer I am the one! So just ordered a set of .85kg...
Capt. Replying to old thread. RT recommends Oil level to 180mm do you happen to know what the level measures out to on a stock set up for a 500?...
Those words are music to my ears. I was suspicious when it smoked, as it also smelled like burnt fruit? Similar to the smell from the glop that...
TGiving is over, me and the little woman are again alone. I am back in the shop. Rode the 86 around the block a couple times, going to work on...
Hah! That's what that noise was!
Idle set to 1200 +- RedKoted tank installed(Well cured, coated it last spring). Road up and down my street, shifted up and down through all five...
I had the wavey one in the right place. I didn't think that the valve would turn without something slippery in there to help it, like that...
I feel quite stupid I put it back together incorrectly. I had the thin little delrin slide washer on the wrong side of valve . It was creating...
I got my petcock rebuilt with new valve 4 hole grommet and oring on the valve. It doesn't leak from that location any longer. Though in fiddling...
Thanks. The stat works, and I have had the fan start and stop as it needs to. I am going to turn the idle up before I start to ponder balance...
Idle adjust now down to about 700.. Purrs like a kitten isn't hesitating as much as intially when started. Needs a good warm up.
Yessir! I looked at those while I was scratching my head. So looked em up. They are made in Germany. I recognized them from some process...
Okay back at work on the 86. I have new clamps for the insulators that were leaking. The old (OEM) clamps were shot. They had used up all of...
I have one 41mm driver as well, and the same universal pvc driver as well. I have a circlip plier that works on my other bikes? What is so...
Separate names with a comma.
