OK, here's another theory - and this is a right fielder: The contacts in the fuel pump have welded themselves together, closing the circuit...
Let's not make assumptions about me using a 'cheap meter' in this thread :mad2:. The meter being used is a Fluke 77 DMM - not a piece of Harbor...
Like the short connection between the fuel cut relay and the pump? The fuse did not pop until the pump was plugged in and the kill switch was set...
Well I just got back from checking stuff and the fuel pump was the component that blew the fuse when it was reconnected and the kill switch was...
That's not mine - I pulled it from the web. My diode (as well as every other electrical connection) has been pretty clean of corrosion.
My next stop was to check the fuel pump and it's related relays... The redneck way sounds good to me, but I will use my meter to check the...
OK, the handlebar switches on the right handlebar all check out fine. I took both apart - there was no corrosion, and just some greasy schmutz...
Also, as far as electrical "changes" I have, I just added an in-dash 2 wire voltmeter, tied into the switched power supply from the clock. I do...
You are right it is not the (5) fuse but the other 10A fuse. It is blowing when the ignition is ON and the kill switch is flipped to RUN. The side...
[ATTACH] So what do I check for first, here? Electrical troubleshooting is not my forte. The fuse that is blowing out is the (5) fuse on the...
Since my prime suspect was the starter switch, I will check the kill switch, too. I do find it odd that the kill switch would be the culprit, as a...
Hey guys - It's been a long while since I posted anything, but I have a problem that I recently encountered that really got me twisted. In...
I have a Two Brothers Racing low mount oval on my 4G. I'd go out and snap a picture of it for you, but I am in SC and the bike is in VT. I can't...
I am going to disagree that the damages are not significant... but $600 for a 9800 mile '96 is pretty awesome. I see the following parts...
180 width only, 170 width is $149.99. 70 bucks more for 10mm less. :crazy:
It's like an industrial restaurant freezer here in my neck of the woods. Wednesday morning: -19F (-28.3C) Thursday morning: -12F (-24.5C) This...
Except that the rear wheel is now 5-lug. Good luck with that.
The red on our bikes is a THREE stage paint, you'll never be able to match it with one can of paint. Stage 1 is a light reddish-pink basecoat....
My 4G has ALWAYS seemed to run 'cold' and registers only slightly above 'C', except in traffic when it's above 75 degrees or so. When this...
I have purchased and used the Chinese rotors on my 4G for two seasons. They are great, and so much better than guessing on a set of used rotors....
Separate names with a comma.
