New lines came in the mail July 18th. Made a "Best Offer" deal on a 14mm rear master that arrived a couple of days prior. [ATTACH]
Looks like they are all available yet.. https://www.babbittsonline.com/oemparts/l/hon/53a8591bf870020ba8ccf695/2014-vfr800f-ac-parts
Well done! Thank you for sharing the findings. I hope to never run into that problem. Glad you have it sorted. Now you can post some photos of...
Just placed and order with them. Fingers crossed that my measurements are correct, and that they show up soon. I have a potential track day...
Thanks Terry! I suspect that the orignal brake lines are failing internally, and I would like to have more "feel" and not have to either pull the...
Anyone know what the thread pitch is on the banjo bolts? I'm guessing they are 1.25.
Thanks mello for the input and link. I may be mistaken in my thinking, but as I understand the front curcut there is no change in ratio because...
I've also measured mine using a section of heavy extention cord (it's what I had on hand). I wish I was that close to a supplier, must be nice!
I plan to disable the center pistons on the front, remove all the linked pipe work, fill the second master on the left fork leg with silicone...
Okay, looking at some photos I can answer one question. The rear line on the 5th gen is longer because the caliper is mounted on the bottom side...
I do not want to purchase a 5th gen "kit". Only want two line front and single rear using the stock calipers. The question is will the lines for...
Powder Graphite is what I use. WD40 gets very sticky, that makes it great at limiting corrosion but it attracts dust and dirt.
In the tail, under the seat.
Good question for the 6th gen mechanics. I know that in the 5th gen I have to burp the system by blipping the throttle multiple times.
I admit that I am not an expert in carb tuning. That being said, if it is running lean I believe you need to shim the needles so that they are...
I would think that any of the four years of the 5th gen tanks would fit.
You are correct in thinking that low coolant level will cause the idle to be high after the engine is warm. Even after filling the coolant it may...
Missing a mirror too, is it not?
I hit and killed a large raccoon with my VF700S. Didn't upset the bike at all. Once again in the dark. Didn't see it until I was 10-15 feet...
Just getting caught up! That's great news that the starter was the problem, not the motor! Good work Bazza.
Separate names with a comma.
