Aren't we all.
As the Mandalorian's say......this is the way.
Always try the most simple things first. :Boom:
1.) Operating the choke creates a rich, or enriched, condition. Is the engine cold or hot when you operate the choke? 1.) Should be plugged...it...
Hmmmm. Slide hanging up? Totally spitballing here...as you can prolly tell.
Generally speaking, it's a lean condition that causes that. Air leak? Vacuum line still connected to the petcock? Throttle cables not returning...
I believe it was a gold wing axle that matched....maybe it matches both, or maybe my memory is shit. I bought one off of Ebay to send to a friend...
Most radiators are aluminum, and even some are partially plastic today. There has to be a radiator repair shop in your vicinity. I would be...
Any radiator shop should have a hot tank that should do the trick.
Gotta keep that dream alive.
If you lived closer to me, I'd invite you to my casa and unload all of the RVF stuff I have. I'm never going to do anything with it. If you're...
Ultimately, what ended up helping it the most was the Ignitech programmable ignition with the HRC "TT" ignition map with a "modified" HRC base...
Don't do it, man, these RVF's don't run good without the airbox and the snorkel, without a lot of work. Spent hours on the dyno and we finally got...
The problem is not the carbs, it's the parts and that set of carbs on the RVF is the only thing they were ever used on. Also too much plastic, IMHO.
I came pretty close to asking Mike Norman to help me install FI, as he has done it successfully. In the end, I just couldn't justify the cost in...
You would be surprised at how good you can make one of those, if you are willing to invest a little time and money.
Had the same issue. Steel zip tie with high temp silicone tube [ATTACH]
Although it isn't the best follow through with the material chosen, not sure I can say that the goal was to ground the R/R.
I have an extra ground kit installed on my RVF. Harness to frame, coils to frame, and starter to frame. Don't want a debate, just want to say that...
Sometimes people ask for help, yet don't really want it when they get it. You see it all the time on mechanically related forums.
Separate names with a comma.
