Thermohell Ok My 2003 only Has 7400 miles on it and The thermostat is stuck open. I have fun working on my bike hell I built it from a frame...
Ok I have put off posting this until all the results are in. I have been building a conversion kit that bolts on and you can chose from several...
Wheel conversion pics. [ATTACH][ATTACH][ATTACH][ATTACH] The first gap pic is the bottom and the second is the top of the swing arm. The top is...
got the rear tire mounted. It clears everthing fine. The tightest spot is on the upper side of the swing arm it has 3.5 mm of clearance. no change...
thanks to all. most of the time on cars it works or it dont. It has never failed that on will be way off if its a burnt valve or busted ring....
[ATTACH][ATTACH]I did have a good battery and like I said they are all the same. The throttle was not open and it was cold. The bike was wrecked....
feels like the tipping point. [ATTACH=CONFIG]14672Checked the wheel adapter and found it to be hitting the lip on the hub. I had to make the...
Ok I have been fixing up a 2003 VFR I wanted to be sure compression was good before final assembly. I found them all to be the same at 75 PSI on...
I will do that. The it seems to have about a 1/4inch right now, could be a little more. The tire shouldnt hang over the rim due to the wide lip....
pics of ongoing build :chaingun: ok some pics of adapter and wheel along with new triangle parts made by a good friend of...
yes it indeed needs more cowbell, I wish i knew how to put the pics on the sight already open .
Ok Got It Running I had run the bike when I first bought it. It smoked a lot and I had to put new plugs in it because it had been on its side for...
Rear wheel conversion with a twist. working on a new wheel kit wish me luck
Separate names with a comma.
