You need an H4 HID conversion kit. There are plenty out there that are bike specific and plug and play. Some do the low and high beams, whilst...
The rear subframe is made of steel and not aluminium. It can be persuaded back into shape using levers and sheer brute force. This is best done...
Sounds perfectly normal to me, they all do that. Mine is exactly the same and every other one I have every heard of.
It will be the carb balance. The 750 is well known for this sort of vibration when the carbs are out of balance. Do this before you look elsewhere...
It's the tank vent tube. I would replace it when you get a chance. The clip is supposed to hold the top in place. It exits down the right hand...
RS Motorbike Paint - Motorcycle paint, bike paint, Kawasaki Honda Yamaha HTH
What you describe sound perfectly normal to me. The 90-97 VFR750 frame gets very hot and is just fine. The temerature gauge is just above the...
I have placed a PDF service manual on my son's kart racing site in the technical section together with a parts fiche. Feel free to download...
Yes they are and well made. I have a set on my 91FL and 97FV.
It's normal and Honda even put a small 3mm hole on the underside of the silencer front end so that the water can drip out. You will be...
The Motad system exits to the right exactly as the original. It is made to take the original silencer and no rejetting is required. They fit fine...
Haynes still do a manual that covers all 750 models from 1986 - 1997 so that would include yours. It can be found here: Product: Honda VFR750...
No, stick with the 180/55. If you try and put a 190 section tyre on a 5.5" wheel the profile will be pinched at the sides as the tyre is too big...
Joe, I don't have an electronic copy but I do have a paper manual. It's a UK manual but does cover most other European countries. If you tell me...
I have a high mount Staintune on a 97 FV. You can't use and hard luggage with it fitted and even soft bags have to be protected against the heat....
Separate names with a comma.
